My build test setup compiles allmodconfig all various architectures
(arm64 m68k powerpc riscv s390 sparc64 x86_64) using make -s. If there
is no warning, the only output is
kernel: arch/sparc/boot/image is ready
kernel: arch/sparc/boot/zImage is ready
from the sparc64 build. Copy the incantation from x86 which is silent
when building with make -s and also mentions a version indication.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
---
arch/sparc/boot/Makefile | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/sparc/boot/Makefile b/arch/sparc/boot/Makefile
index 45e5c76d449e..339c42d35089 100644
--- a/arch/sparc/boot/Makefile
+++ b/arch/sparc/boot/Makefile
@@ -24,16 +24,16 @@ ifeq ($(CONFIG_SPARC64),y)
$(obj)/zImage: $(obj)/image FORCE
$(call if_changed,gzip)
- @echo ' kernel: $@ is ready'
+ @$(kecho) 'Kernel: $@ is ready' '(#'$(or $(KBUILD_BUILD_VERSION),`cat .version`)')'
$(obj)/vmlinux.aout: vmlinux FORCE
$(call if_changed,elftoaout)
- @echo ' kernel: $@ is ready'
+ @$(kecho) 'Kernel: $@ is ready' '(#'$(or $(KBUILD_BUILD_VERSION),`cat .version`)')'
else
$(obj)/zImage: $(obj)/image FORCE
$(call if_changed,strip)
- @echo ' kernel: $@ is ready'
+ @$(kecho) 'Kernel: $@ is ready' '(#'$(or $(KBUILD_BUILD_VERSION),`cat .version`)')'
# The following lines make a readable image for U-Boot.
# uImage - Binary file read by U-boot
@@ -59,13 +59,13 @@ targets += uImage
$(obj)/uImage: $(obj)/image.gz FORCE
$(call if_changed,uimage)
$(call if_changed,uimage.o)
- @echo ' Image $@ is ready'
+ @$(kecho) 'Kernel: $@ is ready' '(#'$(or $(KBUILD_BUILD_VERSION),`cat .version`)')'
endif
$(obj)/image: vmlinux FORCE
$(call if_changed,strip)
- @echo ' kernel: $@ is ready'
+ @$(kecho) 'Kernel: $@ is ready' '(#'$(or $(KBUILD_BUILD_VERSION),`cat .version`)')'
$(obj)/tftpboot.img: $(obj)/image $(obj)/piggyback System.map $(ROOT_IMG) FORCE
$(call if_changed,elftoaout)
--
2.39.2
