On Mon, Jul 31, 2017 at 12:08:47PM +0100, Jonathan Cameron wrote: > On Fri, 28 Jul 2017 12:03:50 -0700 > "Paul E. McKenney" <paulmck@xxxxxxxxxxxxxxxxxx> wrote: > > > On Fri, Jul 28, 2017 at 06:27:05PM +0100, Jonathan Cameron wrote: > > > On Fri, 28 Jul 2017 09:55:29 -0700 > > > "Paul E. McKenney" <paulmck@xxxxxxxxxxxxxxxxxx> wrote: > > > > > > > On Fri, Jul 28, 2017 at 02:24:03PM +0100, Jonathan Cameron wrote: > > > > > On Fri, 28 Jul 2017 08:44:11 +0100 > > > > > Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx> wrote: > > > > > > > > [ . . . ] > > > > > > > > > Ok. Some info. I disabled a few driver (usb and SAS) in the interest of having > > > > > fewer timer events. Issue became much easier to trigger (on some runs before > > > > > I could get tracing up and running) > > > > >e > > > > > So logs are large enough that pastebin doesn't like them - please shoet if > > > > >>e another timer period is of interest. > > > > > > > > > > https://pastebin.com/iUZDfQGM for the timer trace. > > > > > https://pastebin.com/3w1F7amH for dmesg. > > > > > > > > > > The relevant timeout on the RCU stall detector was 8 seconds. Event is > > > > > detected around 835. > > > > > > > > > > It's a lot of logs, so I haven't identified a smoking gun yet but there > > > > > may well be one in there. > > > > > > > > The dmesg says: > > > > > > > > rcu_preempt kthread starved for 2508 jiffies! g112 c111 f0x0 RCU_GP_WAIT_FQS(3) ->state=0x1 > > > > > > > > So I look for "rcu_preempt" timer events and find these: > > > > > > > > rcu_preempt-9 [019] .... 827.579114: timer_init: timer=ffff8017d5fc7da0 > > > > rcu_preempt-9 [019] d..1 827.579115: timer_start: timer=ffff8017d5fc7da0 function=process_timeout > > > > > > > > Next look for "ffff8017d5fc7da0" and I don't find anything else. > > > It does show up off the bottom of what would fit in pastebin... > > > > > > rcu_preempt-9 [001] d..1 837.681077: timer_cancel: timer=ffff8017d5fc7da0 > > > rcu_preempt-9 [001] .... 837.681086: timer_init: timer=ffff8017d5fc7da0 > > > rcu_preempt-9 [001] d..1 837.681087: timer_start: timer=ffff8017d5fc7da0 function=process_timeout expires=4295101298 [timeout=1] cpu=1 idx=0 flags= > > > > Odd. I would expect an expiration... And ten seconds is way longer > > than the requested one jiffy! > > > > > > The timeout was one jiffy, and more than a second later, no expiration. > > > > Is it possible that this event was lost? I am not seeing any sign of > > > > this is the trace. > > > > > > > > I don't see any sign of CPU hotplug (and I test with lots of that in > > > > any case). > > > > > > > > The last time we saw something like this it was a timer HW/driver problem, > > > > but it is a bit hard to imagine such a problem affecting both ARM64 > > > > and SPARC. ;-) > > > Could be different issues, both of which were hidden by that lockup detector. > > > > > > There is an errata work around for the timers on this particular board. > > > I'm only vaguely aware of it, so may be unconnected. > > > > > > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/clocksource/arm_arch_timer.c?h=v4.13-rc2&id=bb42ca47401010fc02901b5e8f79e40a26f208cb > > > > > > Seems unlikely though! + we've not yet seen it on the other chips that > > > errata effects (not that that means much). > > > > If you can reproduce quickly, might be worth trying anyway... > > > > Thanx, Paul > Errata fix is running already and was for all those tests. I was afraid of that... ;-) > I'll have a dig into the timers today and see where I get to. Look forward to seeing what you find! Thanx, Paul > Jonathan > > > > > Jonathan > > > > > > > > > > > Thomas, any debugging suggestions? > > > > > > > > Thanx, Paul > > > > > > > > > > -- To unsubscribe from this list: send the line "unsubscribe sparclinux" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
