sparcSTATION 5 (microSPARC-II) works fine ... ~ # uname -a Linux ss5 2.6.38-rc2-up #4 Sat Mar 5 22:15:54 CET 2011 sparc sun4m Fujitsu MB86904 GNU/Linux screen not found. Can't open input device. Keyboard not present. Using tty for input and output. SPARCstation 5, No Keyboard ROM Rev. 2.24, 256 MB memory installed, Serial #8625209. Ethernet address 8:0:20:83:9c:39, Host ID: 80839c39. Rebooting with command: Boot device: /iommu/sbus/espdma@5,8400000/esp@5,8800000/sd@3,0 File and args: SILO Version 1.4.14 boot: Loaded kernel version 2.6.38 PROMLIB: obio_ranges 1 OF stdout device is: /obio/zs@0,100000:a Booting Linux... [ 0.000000] PROMLIB: Sun Boot Prom Version 3 Revision 2 [ 0.000000] Linux version 2.6.38-rc2-up (root@jalapeno) (gcc version 4.4.4 (Gentoo 4.4.4-r2 p1.3, pie-0.4.5) ) #4 Sat Mar 5 22:15:54 CET 2011 [ 0.000000] ARCH: SUN4M [ 0.000000] TYPE: SPARCstation 5 [ 0.000000] Ethernet address: 08:00:20:83:9c:39 [ 0.000000] Boot time fixup v1.6. 4/Mar/98 Jakub Jelinek (jj@xxxxxxxxxxxxxx). Patching kernel for srmmu[Fujitsu Swift]/iommu [ 0.000000] 63MB HIGHMEM available. [ 0.000000] OF stdout device is: /obio/zs@0,100000:a [ 0.000000] PROM: Built device tree with 19644 bytes of memory. [ 0.000000] Power off control detected. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64296 [ 0.000000] Kernel command line: root=/dev/sda6 [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 253844k/261840k available (1872k kernel code, 7996k reserved, 484k data, 108k init, 65232k highmem) [ 0.000000] SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:64 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Calibrating delay loop... 107.32 BogoMIPS (lpj=179712) [ 0.059999] pid_max: default: 32768 minimum: 301 [ 0.059999] Mount-cache hash table entries: 512 [ 0.069999] NET: Registered protocol family 16 [ 0.089999] IOMMU: impl 0 vers 4 table 0xfbc80000[262144 B] map [65536 b] [ 0.106666] bio: create slab <bio-0> at 0 [ 0.113333] SCSI subsystem initialized [ 0.169999] NET: Registered protocol family 2 [ 0.169999] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.173333] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.173333] TCP bind hash table entries: 8192 (order: 3, 32768 bytes) [ 0.176666] TCP: Hash tables configured (established 8192 bind 8192) [ 0.176666] TCP reno registered [ 0.176666] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.176666] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.179999] apc: power management initialized [ 0.183333] highmem bounce pool size: 64 pages [ 0.279999] msgmni has been set to 368 [ 0.286666] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.286666] io scheduler noop registered [ 0.286666] io scheduler deadline registered (default) [ 0.289999] ffd2c580: ttyS0 at MMIO 0x71100000 (irq = 6) is a zs [ 0.289999] Console: ttyS0 (SunZilog zs0) [ 0.293333] console [ttyS0] enabled [ 0.296666] ffd2c580: ttyS1 at MMIO 0x71100004 (irq = 6) is a zs [ 0.299999] ffd2c634: Keyboard at MMIO 0x71000000 (irq = 6) is a zs [ 0.303333] ffd2c634: Mouse at MMIO 0x71000004 (irq = 6) is a zs [ 0.313333] esp: esp0, regs[fd00b000:fd00a000] irq[2] [ 0.316666] esp: esp0 is a FAS100A, 40 MHz (ccf=0), SCSI ID 7 [ 3.326666] scsi0 : esp [ 4.049999] scsi 0:0:3:0: Direct-Access FUJITSU MAP3735N SUN72G 0401 PQ: 0 ANSI: 4 [ 4.053332] scsi target0:0:3: Beginning Domain Validation [ 4.069999] scsi target0:0:3: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15) [ 4.083332] scsi target0:0:3: Domain Validation skipping write tests [ 4.086666] scsi target0:0:3: Ending Domain Validation [ 4.583332] scsi 0:0:6:0: CD-ROM PLEXTOR CD-R PX-W4220T 1.04 PQ: 0 ANSI: 2 [ 4.586666] scsi target0:0:6: Beginning Domain Validation [ 4.603332] scsi target0:0:6: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 8) [ 4.616666] scsi target0:0:6: Domain Validation skipping write tests [ 4.619999] scsi target0:0:6: Ending Domain Validation [ 4.633332] mousedev: PS/2 mouse device common for all mice [ 4.639999] rtc-m48t59 rtc-m48t59.0: rtc core: registered m48t08 as rtc0 [ 4.646666] TCP cubic registered [ 4.653332] rtc-m48t59 rtc-m48t59.0: setting system clock to 2011-03-07 06:46:37 UTC (1299480397) [ 4.673332] sd 0:0:3:0: [sda] 143374738 512-byte logical blocks: (73.4 GB/68.3 GiB) [ 4.683332] sd 0:0:3:0: [sda] Write Protect is off [ 4.696666] sd 0:0:3:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 4.729999] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 [ 4.756666] sd 0:0:3:0: [sda] Attached SCSI disk [ 4.779999] EXT3-fs: barriers not enabled [ 4.793332] kjournald starting. Commit interval 5 seconds [ 4.796666] EXT3-fs (sda6): mounted filesystem with ordered data mode [ 4.799999] VFS: Mounted root (ext3 filesystem) readonly on device 8:6. [ 4.803332] Freeing unused kernel memory: 108k freed INIT: version 2.86 booting [ 6.569999] NET: Registered protocol family 1 Gentoo Linux; http://www.gentoo.org/ Copyright 1999-2007 Gentoo Foundation; Distributed under the GPLv2 ... INIT: Entering runlevel: 3 ... login: Marcel On Sun, Mar 6, 2011 at 10:11 PM, Bob Breuer <breuerr@xxxxxx> wrote: > Josip Rodin wrote: >> On Sun, Mar 06, 2011 at 10:13:56AM +0100, Marcel van Nies wrote: >>> The hyperSPARC gives the same error without the final genirq patch. >>> >>> On Sun, Mar 6, 2011 at 8:23 AM, Marcel van Nies <morcles@xxxxxxxxx> wrote: >>>> The hyperSPARC boots, but fails when starting init. It runs fine on 2.6.17. >> >> I realize that it may be a difficult proposition, but you could try to >> git bisect it. >> >> Did you try it on anything after 2.6.17, maybe that narrows it down further? >> > > You shouldn't have to go back that far... I was last running 2.6.22 on > hyperSPARC successfully. Ok, maybe that's not so helpful as it looks > like it's been a while since I've built a sparc kernel. Probably time > for me to also try out a new kernel. > > Bob > > -- > To unsubscribe from this list: send the line "unsubscribe sparclinux" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe sparclinux" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
