Hi, On Thu, Apr 19, 2007 at 12:41:39AM -0700, David Miller wrote: > > The current driver should not hit the problems you saw. I plan > to post in-full the current driver as a patch in a few moments, > if you could retest this case with it, I'd really appreciate it. > Did add this 'new esp v2' to linux-2.6.21-rc7 and booted with two of those seagates, which did timeout previously. No problems at all. Ran quickly 'dbench 32' for sda and sdb simultaneously, if that is proving anything. Will leave those running in loop while i do get some sleep .... and hope those dbench-loop will be still alive when i wake up :) Good job so far with the new esp driver. ---- CLIP CLIP ---- SCSI subsystem initialized scsi0 : esp esp: esp0 found at /sbus@3,0/SUNW,fas@3,8800000, regs[1c738810000:1c738800000] irq[20] esp: esp0 is a FASHME, 40 MHz (ccf=0), SCSI ID 7 scsi 0:0:0:0: Sequential-Access HP C1537A L007 PQ: 0 ANSI: 2 target0:0:0: Beginning Domain Validation target0:0:0: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15) target0:0:0: Domain Validation skipping write tests target0:0:0: Ending Domain Validation scsi 0:0:2:0: Direct-Access SEAGATE ST336704LSUN36G 032C PQ: 0 ANSI: 3 target0:0:2: Beginning Domain Validation target0:0:2: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns, offset 15) target0:0:2: Domain Validation skipping write tests target0:0:2: Ending Domain Validation SCSI device sda: 71132959 512-byte hdwr sectors (36420 MB) sda: Write Protect is off sda: Mode Sense: cf 00 10 08 SCSI device sda: write cache: disabled, read cache: enabled, supports DPO and FUA SCSI device sda: 71132959 512-byte hdwr sectors (36420 MB) sda: Write Protect is off sda: Mode Sense: cf 00 10 08 SCSI device sda: write cache: disabled, read cache: enabled, supports DPO and FUA sda: sda1 sda2 sda3 sda4 sd 0:0:2:0: Attached scsi disk sda scsi 0:0:3:0: Direct-Access SEAGATE ST336704LSUN36G 032C PQ: 0 ANSI: 3 target0:0:3: Beginning Domain Validation target0:0:3: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns, offset 15) target0:0:3: Domain Validation skipping write tests target0:0:3: Ending Domain Validation SCSI device sdb: 71132959 512-byte hdwr sectors (36420 MB) sdb: Write Protect is off sdb: Mode Sense: cf 00 10 08 SCSI device sdb: write cache: disabled, read cache: enabled, supports DPO and FUA SCSI device sdb: 71132959 512-byte hdwr sectors (36420 MB) sdb: Write Protect is off sdb: Mode Sense: cf 00 10 08 SCSI device sdb: write cache: disabled, read cache: enabled, supports DPO and FUA sdb: sdb1 sdb2 sdb3 sd 0:0:3:0: Attached scsi disk sdb scsi 0:0:6:0: CD-ROM TOSHIBA XM6201TASUN32XCD 1103 PQ: 0 ANSI: 2 target0:0:6: Beginning Domain Validation target0:0:6: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15) target0:0:6: Domain Validation skipping write tests target0:0:6: Ending Domain Validation --- CLIP CLIP --- -- Pasi Pirhonen - upi@xxxxxx - http://pasi.pirhonen.eu/ Top-postings silently ignored - To unsubscribe from this list: send the line "unsubscribe sparclinux" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
