|
Zion,
If you haven't done
so already, download the IBM Linux for S/390: Distributions Redbook from http://publib-b.boulder.ibm.com/Redbooks.nsf/RedbookAbstracts/sg246264.html.
Read the chapter on Installing Red Hat, and pay particular attention to all the
things you can specify in the parmfile.
Mark
Post
-----Original Message-----
From: Zion Botzer [mailto:zion@sangate.com] Sent: Tuesday, July 09, 2002 8:03 AM To: redhat-s390-list@redhat.com Subject: [Redhat-s390-list] Installing RH 7.2 on Mp3000 - network problem I’m trying to install RH 7.2 on the 3rd LPAR of MP3000 P30. I defined the Ethernet network card as E24,E25 port 3.
Q1. What should I answer during the IPL process when I got this message:
Please enter the FQDN of your new virtual machine (e.g. s390.redhat.com):mylinux.test.itPlease enter the network device you intend to use (e.g. ctc0, escon0,iucv0, eth0, tr0):
I tried several options but failed.
I installed the IBM OCO modules.
Q2. What are the parameters for the correct network device (like: ctc0,0x600,,,)?
I’ll appreciate your help.
Zion SANgate
|
