Rob, I copied the initrd.img and kernel.img files from the Red Hat GA files to my test image, and was able to IPL and access my DASD with no problems. I'm not sure what's going wrong with your image. Here's the redhat.parm file that I use: root=/dev/ram0 ro ip=off ramdisk_size=35000 DASD=301,300,302-30f HOST=testlinux.sys.eds.com DNS=205.191.24.78 CTC=ctc0,0x0f00,0x0f01 chandev=ctc0,0x0f00,0x0f01 CHANDEV=ctc0,0x0f00,0x0f01 SEARCHDNS=sys.eds.com:eds.com INSTALL=server MOUNTS=/dev/dasda1:/,/dev/dasdb1:/usr Mark Post -----Original Message----- From: Rob van der Heij [mailto:rvdheij@iae.nl] Sent: Saturday, December 29, 2001 9:26 AM To: RedHat S/390 Mailing List Subject: [Redhat-s390-list] install fails to recognize the disks When I install the GA code in my VM userid it fails to see the disks (whether I use DASD= in the parm file or get prompted). So /proc/dasd/devices shows all my disks (none) and unknown. When I link the disk afterwards it does get picked up triggered by the machine check interrupt, and then it shows the ECKD part of the driver using it. Am I missing something obvious again? Rob _______________________________________________ Redhat-s390-list mailing list Redhat-s390-list@redhat.com https://listman.redhat.com/mailman/listinfo/redhat-s390-list
