[Redhat-s390-list] Redhat rhsetup & dasd problem

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I am having problems trying to run rhsetup after the starter system has
booted. On every telnet session I've tried (2 different telnet emulators
on Win98, and 2 on a  linux pc ), as soon as I enter rhsetup a message
flashes by so fast I can't read it and then the screen goes black. The
contents of my current lpar.prm are pasted in below, but my original
lpar.prm included all the dasd containing Linux/390 distributions. The
Redhat starter system reformatted most of the other Linux volumes
without being told to do so.  Can you shed any light on what's
happening?

Lpar.prm:
root=/dev/ram0 ro ip=off DASD=0f05,0f01 MOUNTS=/dev/dasda1:/
SWAP=/dev/dasdb1
HOST=Red19.idpnj.com:eth0:192.168.150.248:1500
NETWORK=192.168.150.248:255.255.255.0:192.168.150.255:192.168.150.165
RPMSERVER=192.168.150.59:/Download3/Red DNS=192.168.75.252
SEARCHDNS=idpnj.com LCS=0xfe0,1 INSTALL=default

Sue Sivets

--
 Suzanne Sivets
 Systems Programmer
 Innovation Data Processing
 973-890-7300
 Fax 973-890-7147
 Ssivets@fdrinnovation.com





[Index of Archives]     [Fedora General Discussion]     [LKML]     [Red Hat Install]     [Red Hat Watch]     [Red Hat Development]     [Linux s390]     [Gimp]     [Yosemite News]

  Powered by Linux