I have been struggling with a problem with an AC97 codec and RH 8.0. I also have a RH 7.3 partition on the same machine where this same codec works just fine. Any assistance appreciated. following is my modules.conf ------ alias parport_lowlevel parport_pc alias eth0 tulip alias scsi_hostadapter aic7xxx alias sound via82cxxx_audio post-install sound /bin/aumix-minimal -f /etc/.aumixrc -L >/dev/null 2>&1 || : pre-remove sound /bin/aumix-minimal -f /etc/.aumixrc -S >/dev/null 2>&1 || : alias usb-controller usb-uhci -------- following is output of modprobe. --------- ============================================= Module soundcore kname soundcore objkey soundcore names: soundcore mode: NORMAL Module matching soundcore: /lib/modules/2.4.18-14/kernel/drivers/sound/soundcore.o ============================================= ============================================= Module sound kname sound objkey sound names: sound mode: NORMAL Module matching sound: /lib/modules/2.4.18-14/kernel/drivers/sound/sound.o ============================================= ============================================= Module ac97_codec kname ac97_codec objkey ac97_codec names: ac97_codec mode: NORMAL Module matching ac97_codec: /lib/modules/2.4.18-14/kernel/drivers/sound/ac97_codec.o ============================================= ============================================= Module uart401 kname uart401 objkey uart401 names: uart401 mode: NORMAL Module matching uart401: /lib/modules/2.4.18-14/kernel/drivers/sound/uart401.o ============================================= ============================================= Module via82cxxx_audio kname via82cxxx_audio objkey via82cxxx_audio names: via82cxxx_audio mode: NORMAL Module matching via82cxxx_audio: /lib/modules/2.4.18-14/kernel/drivers/sound/via82cxxx_audio.o ============================================= /sbin/insmod /lib/modules/2.4.18-14/kernel/drivers/sound/sound.o Using /lib/modules/2.4.18-14/kernel/drivers/sound/sound.o Symbol version prefix '' # post-install sound: /bin/aumix-minimal -f /etc/.aumixrc -L >/dev/null 2>&1 || : /sbin/insmod /lib/modules/2.4.18-14/kernel/drivers/sound/ac97_codec.o Using /lib/modules/2.4.18-14/kernel/drivers/sound/ac97_codec.o /sbin/insmod /lib/modules/2.4.18-14/kernel/drivers/sound/uart401.o Using /lib/modules/2.4.18-14/kernel/drivers/sound/uart401.o /sbin/insmod /lib/modules/2.4.18-14/kernel/drivers/sound/via82cxxx_audio.o Using /lib/modules/2.4.18-14/kernel/drivers/sound/via82cxxx_audio.o Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg # delete uart401 # delete ac97_codec # pre-remove sound: /bin/aumix-minimal -f /etc/.aumixrc -S >/dev/null 2>&1 || : # delete sound ===== <><><><><><><><><><> Gary V Roth rothgv@xxxxxxxxx <><><><><><><><><><> __________________________________________________ Do you Yahoo!? Yahoo! Tax Center - forms, calculators, tips, more http://taxes.yahoo.com/
- Prev by Date: Re: [Sound] RedHat 8.0 and Audigy 2 sound card
- Next by Date: [Sound] restarting sound after crash
- Previous by thread: [Sound] RedHat 8.0 and Audigy 2 sound card
- Next by thread: [Sound] Sound in redhat 8.0 works for root only
- Index(es):