Hello, I use RH 9.0 (Shrike), with Adaptec 19160 Ultra 160 and Sony AIT-2 to do my backups. Everything was fine, but yesterday I have to restore a file and I can´t. I can see what I have inside my tape, using #tar -tvf /dev/st0 but when I try to extract my backup using #tar -xvf /dev/st0 somedirectory/somesubdirectory/myfile I get this error messages from my /var/log/messages 90 minutes later I typed the command : Jul 14 11:27:53 servarq kernel: (scsi0:A:0:0): Unexpected busfree in Data-in phase Jul 14 11:27:53 servarq kernel: SEQADDR == 0x8c Jul 14 11:27:53 servarq kernel: st0: Error 70000 (sugg. bt 0x0, driver bt 0x0, host bt 0x7). Jul 14 11:27:53 servarq kernel: st0: Error 10000 (sugg. bt 0x0, driver bt 0x0, host bt 0x1). Jul 14 11:27:56 servarq last message repeated 9 times Jul 14 11:27:56 servarq kernel: st0: Error with sense data: Info fld=0x40, Current st09:00: sense key Unit Attention Jul 14 11:27:56 servarq kernel: Additional sense indicates Power on,reset,or bus device reset occurred Jul 14 11:27:56 servarq kernel: st0: Error with sense data: Current st09:00: sense key Not Ready Jul 14 11:27:56 servarq kernel: Additional sense indicates Medium not present I am completely lost ... Somebody could help me or simply give an idea on what is happening ???? Regards. InfraNet Tecnologia Fábio M. A. Cunha (55 11) 5542-0941 ramal 22 (55 11) 8456-5283 www.infranetsp.com.br www.fsf.org -- Shrike-list mailing list Shrike-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/shrike-list
