Matt Brodeur schrieb:
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On Fri, Jul 16, 2004 at 05:46:10PM +0200, Pekka K. Kurki wrote:
I have two RH9 systems - with a different system history. As I tried to
set up firewalls I saw that one system is running with ipchains and the
other one with iptables. I'd like to have both ones on iptables. But
when I try to run (on the system with ipchains) iptables --list I get a
bunch of nasty error messages like:
IIRC, you can't load iptables while the ipchains module is loaded.
I thought that the error message said something to this effect, but
it's been a while since I used ipchains. Try this:
# /sbin/service ipchains stop
# /sbin/rmmod ipchains
Then try loading/running iptables. You might have modules other
than just ipchains to clear away. You'll probably also want to do
this:
# /sbin/chkconfig ipchains off
# /sbin/chkconfig iptables on
Personally, I usually "rpm -e ipchains" since I never have a need
for it. If you're really stuck, remove the ipchains RPM and reboot.
That will definately clear out the offending modules, and should
prevent them from being reloaded.
- --
Matt Brodeur RHCE
MBrodeur@xxxxxxxxxxxx http://www.NextTime.com
Thanks a lot! It worked perfectly this way!
best regards,
Pekka
---
(Mr.) Pekka K. Kurki
Intellectics GesmbH
http://www.intellectics.at, http://www.intellectics.com
|
--
Shrike-list mailing list
Shrike-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/shrike-list
