shrike-list-admin@xxxxxxxxxx wrote: > On Fri, 2003-10-17 at 13:23, Jake McHenry wrote: >> shrike-list-admin@xxxxxxxxxx wrote: >>> On Thu, 16 Oct 2003, Jake McHenry wrote: [snip] > >> This is the way I have it set up already... Just from messing with >> it and common sense.. And it still doesn't work. I changed the com >> port, it says Online now, but I don't get anything on the screen. > > Are you trying to get _in_ to the machine through a serial > cable connection from another machine, or are you trying to > get _out_ through the serial cable to something connected to it? > >> I've tried ttyS0 and ttyS1, could the ports be called anything else? > > probably not! Generally the equivalent to windows goes like > this: ttyS0 = com1 ttyS1 = com2 ttyS2 = com3 ttyS3 = com4 > > HTH, > -- > Iain Buchanan <iain@xxxxxxxxxxxx> I'm trying to go from my linux box, to my phone switch via serial cable. The phone switch is not a computer, it's a box on a wall that I can get into and configure my speed dials, extensions... Etc. When I plug the cable back into my windows box, I can get right into it. It's com1 on the windows box, 8 data, Mark parity, 1 stop, 9600. Those same options, on every port I've tried so far, do not work under minicom as far as I can see.... Jake McHenry Nittany Travel MIS Coordinator http://www.nittanytravel.com -- Shrike-list mailing list Shrike-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/shrike-list
