On Monday 22 September 2003 08:13, Andrew Robinson wrote: > I've installed Red Hat 9 on my Dell Latitude CPi laptop. When it boots > up (or when I run "ifup eth0"), I get this message: > > 3c59x device eth0 does not seem to be present, delaying initialization. > > According to the Windoze 2K hardware profile, my NIC is listed as > > FEM656-3Com 10-100 LAN+56K Modem CardBus PC Card (Fast Ethernet) > > I tried poking around a little bit. The "insmod 3c59x" command gives > > Using /lib/modules/2.4.20-20.9-awr1/kernel/drivers/net/3c59x.o > /lib/modules/2.4.20-20.9-awr1/kernel/drivers/net/3c59x.o: init_module: > No such device > Hint: insmod errors can be caused by incorrect module parameters, > including invalid IO or IRQ parameters. > You may find more information in syslog or the output from dmesg > > It seems to me that I have a problem with the 3c59x driver. However, I > don't know enough to really interpret these messages. Would some kind > soul put me on the path of enlightenment to fixing this problem? > Just an educated guess; Maybe the 3c59x is the wrong driver ?? I've used two different 3Coms in my CPx-J but neither is the 565. (currently using 575 and I don't recall the number on the first one, an old 10 meg nic) Not sure where to point you for more research. Do you need a docking station for it ?? (assuming the CPi and CPx both use the same dock) Joebewan -- Shrike-list mailing list Shrike-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/shrike-list
