The hardware is an intel board E7507VB20 It is Intel !! Intel chips, dual Xeon 2.4GHz, Intel drivers and it does not work Hello intel.... Dan -----Original Message----- From: Dan Bar Dov [mailto:danb@xxxxxxxxxxxx] Sent: Wednesday, September 17, 2003 8:25 PM To: 'shrike-list@xxxxxxxxxx' Subject: RE: e1000 does not work on SMP lspci identifies it as 05:02.0 Ethernet controller: Intel Corp. 82540EM Gigabit Ethernet Controller (rev 02) I have no idea beyond that and that is is embedded in the motherboard along with a second e100: 06:03.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 0d) Dan -----Original Message----- From: Jesse Keating [mailto:hosting@xxxxxxxxxxxxxxx] Sent: Wednesday, September 17, 2003 5:47 PM To: shrike-list@xxxxxxxxxx Subject: Re: e1000 does not work on SMP On Wednesday 17 September 2003 06:04, Dan Bar Dov uttered: > I have a problem making an e1000 on-board NIC to work using SMP kernel. > > After the redhat-9 e1000 did not work, I compiled e1000-5.2.16 from intel > using the smp kernel. The module created loads but won't communicate. The > same version, on the same non-smp-kernel, same hardware, works fine. Strange, what hardware do you have? We've been using e1000 on all our systems and haven't had any issues yet... -- Jesse Keating RHCE MCSE http://geek.j2solutions.net Mondo DevTeam (www.mondorescue.org) Was I helpful? Let others know: http://svcs.affero.net/rm.php?r=jkeating -- Shrike-list mailing list Shrike-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/shrike-list -- Shrike-list mailing list Shrike-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/shrike-list -- Shrike-list mailing list Shrike-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/shrike-list
