On Friday 29 August 2003 13:14, Dylon wrote: > Hello, > I am trying to install a RAID 1 setup on redhat 9.0 I am using MSI > KT3 Ultra ARU with the Promise Fastrack 133. I can set up a software > RAID but I cant get redhat to see the Promise hardware raid. So how > would I do this? I have 2 20 gig Hard Drives that boots up to the > IDE0 and IDE1 I tried the ide 3 and 4 and the Hardware showed the > RAID 1setup in BIOS using the fastrack raid utility and I installed > Redhat but it showed them as drives e and g not as a RAID disk set. > > Any advice.. Best advice possible on this system, don't use Promise for raid. Period. You'll be FAR better off using it as a straight IDE controller, and letting the Linux Kernel handle software raid. -- Jesse Keating RHCE MCSE http://geek.j2solutions.net Mondo DevTeam (http://www.microwerks.net/~hugo/) Was I helpful? Let others know: http://svcs.affero.net/rm.php?r=jkeating -- Shrike-list mailing list Shrike-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/shrike-list
