On Wed, 2003-07-23 at 16:52, mick mearns wrote: > Hello list; > I have the above SCSI controller. > I downloaded the 2.6 source and installed it. > It compiles fine under RH9. > The 2.6 failure is in the make initrd for the AIC7xxx > > My method: > 'cd /usr/src/*2.6*' > 'make mrpoper' > I copied my working RH9 .config and used > 'make menuconfig' > I tried making everything scsi with no modules, and with all modules. > Then 'make bzImage modules modules_install install' > > I get an initrd error 'error AIC7xxx no module:' > I am on a different machine right now and don't have the full error > display. > I do have a /initrd directory. Have u done this in make menuconfig? SCSI device support ---> SCSI low-level drivers ---> Adaptec AIC7xxx Fast -> U160(New Driver) Have you built it in the kernel <*> or made a module out of this <M> ? ls /lib/modules/2.6.0-test1/kernel/drivers/scsi/aic7xxx/ what is the output of this ? Does it list aic7xxx.o ? I am currently compiling and having another adaptec card which also uses the same module I was interested. -- Arindam Dey The mind is not a vessel to be filled but a fire to be kindled. GPG FPR: B8E3 219E F129 F970 F4A7 BC50 9636 504A BEDF 5739 -- Shrike-list mailing list Shrike-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/shrike-list
