On Wed, 2003-05-14 at 10:37, antonio wrote: > The scanner was working on RedHat 8.0, I made a fresh install of RedHat > 9, and I followed same procedure as in RH8.0. > Even if I use the instruction modprobe scanner vendor=0x04b8 > product=0x010b, when I start Sane I get no device available.. > Any hint? To setup scanner, edit /etc/sane.d/epson.conf - uncomment last line: # epson.conf # # here are some examples for how to configure the EPSON backend # # SCSI scanner: scsi EPSON # # Parallel port scanner: #pio 0x278 #pio 0x378 #pio 0x3BC # # USB scanner - only enable this if you have an EPSON scanner. It could # otherwise block your non-EPSON scanner from being # recognized. # Depending on your distribution, you may need either the # first or the second entry. #usb /dev/usb/scanner0 usb /dev/usb/scanner0 gerry
