On Thu, 1 May 2003, shrek-m@xxxxxx wrote: > Jeff Kinz schrieb: > >Did your UPS come with any Linux based software to make your linux box > >UPS-aware or UPS-friendly? > > > easy to install, works great > > # service apcupsd status > DATE : Thu May 01 15:30:09 CEST 2003 > HOSTNAME : xp1800 > RELEASE : 3.10.3 > VERSION : 3.10.3 (12 December 2002) redhat > UPSNAME : APC#1 > CABLE : Custom Cable Smart > MODEL : SMART-UPS 700 > UPSMODE : Stand Alone > STARTTIME: Thu May 01 12:16:49 CEST 2003 > STATUS : ONLINE > LINEV : 222.3 Volts > LOADPCT : 26.5 Percent Load Capacity > BCHARGE : 100.0 Percent > ... > > http://www.sibbald.com/apcupsd/ Thanks for mentioning apcupsd. I should mention that the nut packages that comes with RH9 works fine with APC UPSs. I used the newapc driver. My problems were due to confusion about which config file to edit (the Red Hat Way is to use /etc/sysconfig/ups, not /etc/ups/ups.conf) and the cable that I was using. Chris