Hi,
On Fri, Jun 06, 2003 at 08:15:36AM -0700, Bob Arendt wrote:
> I had the same problem; Sidestepped it by using a network-install.
Yep, I did that too.
> It's much faster than a CD install, and you don't have to babysit
> the CD's.
Babysit CD's ? What's THAT ? :) :) :)
I burned _one_ DVD with everything on it so there is _no_ swapping ! :)
> -Bob Arendt
>
> Mario Mikočević wrote:
> >Hi,
> >
> >Uniform Multi-Platform E-IDE driver Revision: 7.00beta3-.2.4
> >ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> >SvrWks CSB5: IDE controller at PCI slot 00:0f.1
> >SvrWks CSB5: chipset revision 147
> >SvrWks CSB5: not 100% native mode: will probe irqs later
> >SvrWks CSB5: simplex device: DMA forced
> > ide0: BM-DMA at 0x2000-0x2007, BIOS settings: hda:pio, hdb:pio
> >SvrWks CSB5: simplex device: DMA forced
> > ide1: BM-DMA at 0x2008-0x200f, BIOS settings: hdc:pio, hdd:pio
> >hda: Compaq DVD-ROM DV28EB 01, ATAPI CD/DVD-ROM drive
> >hda: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
> >hda: set_drive_speed_status: error=0x04
> >ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> >
> >the very same error barfs on me during CD booting but installer _can_ _not_
> >find CD afterwards.
> >
> >Any hints ?
This inquiry still stands.
--
Mario Mikočević (Mozgy)
mozgy at hinet dot hr
It's never too late to have a good childhood!
The older you are, the better the toys!
My favourite FUBAR ...
