grub doesn't autoboot anymore

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hey all,

I recently swapped my disks around. I moved my boot drive from /dev/hdb
to /dev/hda (same drive, just its place on the cable). Now, when the
system boots, it loads the grub> prompt and waits for further input.
How do I get it to load the grub menu?

My /boot/grub directory and grub.conf file are below. You'll note that
menu.lst is a soft-link to grub.conf, as seems to be typical.

The only other thing of note is that, as I swapped the drive around,
I found it necessary to boot from a grub floppy, then reinstall grub
on the hard drive (using the grub setup command). That may or may not
be relevant.

Anything else look funny here?

 - gary




[root@localhost grub]# ll
total 228
-rw-r--r--    1 root     root          101 Aug 19 08:11 device.map
-rw-r--r--    1 root     root        10848 Aug 21 18:44 e2fs_stage1_5
-rw-r--r--    1 root     root         9776 Aug 21 18:44 fat_stage1_5
-rw-r--r--    1 root     root         8864 Aug 21 18:44 ffs_stage1_5
-rw-r--r--    1 root     root          602 Sep 20 08:53 grub.conf
-rw-r--r--    1 root     root        11072 Aug 21 18:44 jfs_stage1_5
lrwxrwxrwx    1 root     root           11 Aug 19 08:11 menu.lst ->
./grub.conf
-rw-r--r--    1 root     root         9280 Aug 21 18:44 minix_stage1_5
-rw-r--r--    1 root     root        12512 Aug 21 18:44 reiserfs_stage1_5
-rw-r--r--    1 root     root         7985 Sep  6  2002 splash.xpm.gz
-rw-r--r--    1 root     root          512 Aug 21 18:44 stage1
-rw-r--r--    1 root     root       130340 Aug 21 18:44 stage2
-rw-r--r--    1 root     root         8576 Aug 21 18:44 vstafs_stage1_5
-rw-r--r--    1 root     root        12552 Aug 21 18:44 xfs_stage1_5


[root@localhost grub]# cat grub.conf
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE:  You have a /boot partition.  This means that
#          all kernel and initrd paths are relative to /boot/, eg.
#          root (hd1,0)
#          kernel /vmlinuz-version ro root=/dev/hdb6
#          initrd /initrd-version.img
#boot=/dev/hda
default=0
timeout=10
splashimage=(hd0,0)/grub/splash.xpm.gz

title Red Hat Linux (2.4.20-19.7)
        root (hd0,0)
        kernel /vmlinuz-2.4.20-19.7 ro root=/dev/hda6 hdd=ide-scsi

#
#title Windows XP
#       root (hd0,0)
#       makeactive
#       chainloader +1
#




-- 
Psyche-list mailing list
Psyche-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/psyche-list

[Index of Archives]     [Fedora General Discussion]     [Red Hat General Discussion]     [Centos]     [Kernel]     [Red Hat Install]     [Red Hat Watch]     [Red Hat Development]     [Red Hat 9]     [Gimp]     [Yosemite News]

  Powered by Linux