On Fri, 13 Jun 2003, Tomas Larsson wrote: > > On Thu, 12 Jun 2003, Tomas Larsson wrote: > > > > > This question is mainly directed to Swedish users. > > > I'm using Telia ADSL, I have one RH8 box running as > > firewall NAT and > > > router. To automate login I am using qadsl and LFCK, not at > > the same > > > time though. My problems is that when the firewall is up > > and running, > > > neither qadsl or LFCK can login. Everything is started > > automatically, > > > firewall at 11 after IF brought up and qadsl/LFCK at 60. > > > When the RH-box for any reason is restarted, I have to > > manually shut down > > > and flush the firewall restart QADSL/LFCK and then enable > > the firewall. > > > I am using gShield to set up IP-tables. > > > Obviously there is something I forgot to do but what? > > > > What is in the logs?? The answer should be in there. > > "login failed" or similar, nothing else. OK, let me ask the same question but a little differently, do you see any messages from gShield in the logs? Something prefixed with the gShield DropNLog in it. What I am thinking is that gShield is not configured quite right and is preventing your connection. I have seen a similar behavior with ssh where if you have an established ssh session to a remote machine iptables/gShield allows it to continue but it will block new connections. It is simply a matter of making sure the correct ports are open. I do not know anything about your Swedish isp but what you describe sounds similar. HTH, -- ......Tom Registered Linux User #14522 http://counter.li.org tdiehl@xxxxxxxxxxxx My current SpamTrap mtd123@xxxxxxxxxxxx -- Psyche-list mailing list Psyche-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/psyche-list
