So what glibc rpms were installed? You can check with rpm -q --qf "%{name}\t%{arch}\n" glibc There seems to be a issue with the "i386" version of the glibc libraries. Sybase tech support has reproduced the problem internally and has forwarded the issue to engineering. The issue seems to be in sprintf --> vsprintf --> vfprintf which is where it dies. The i686 versions of the libraries work just fine. So if you are on a i686 then you should install the i686 versions of glibc. -Connie Sieh On Fri, 28 Mar 2003, Naum Stolarskiy wrote: > This is what I got: > > # ldd dataserver > libm.so.6 => /lib/libm.so.6 (0x40030000) > libdl.so.2 => /lib/libdl.so.2 (0x40051000) > libnsl.so.1 => /lib/libnsl.so.1 (0x40054000) > libpthread.so.0 => /lib/libpthread.so.0 (0x40068000) > libc.so.6 => /lib/libc.so.6 (0x40098000) > /lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0x40000000) > I checked /lib there no i686 directory. > Thanks, > Naum. > > > On Fri, 2003-03-28 at 18:20, csieh wrote: > > Naum, > > > > Go to $SYBASE/ASE-12_5/bin and runs > > "ldd dataserver" what path does it show on the libc > > library? It should show /lib/i686/libc.so.xxx > > > > -Connie Sieh > > On Fri, 28 Mar 2003, Naum Stolarskiy wrote: > > > > > Removed /lib;/usr/lib from ld.so.conf > > > # more /etc/ld.so.conf > > > /usr/lib/qt-1.45/lib > > > /usr/kerberos/lib > > > /usr/lib/wine > > > /usr/lib/mysql > > > /usr/lib/sane > > > /usr/sybase-12.5/lib > > > /usr/lib/qt-2.3.0/lib > > > /usr/lib/qt-3.0.5/lib > > > /usr/X11R6/lib > > > /opt/sybase-12.5/OCS/lib > > > /opt/sybase-12.5/ASE/lib > > > > > > Ran ldconfig -v > > > > > > # $LD_LIBRARY_PATH > > > bash: > > > /opt/office52/adabas/lib:/opt/office52/adabas/lib:/opt/office52/adabas/lib > > > > > > > > > ran asecfg > > > ... same result...same error message > > > Thanks, > > > Naum.. > > > > > > On Fri, 2003-03-28 at 16:42, csieh wrote: > > > > Naum, > > > > > > > > So, the issue seems to be that if /lib:/usr/lib are in LD_LIBRARY_PATH > > > > then /lib/libc-2.2.4.so is used; and with them not /lib/i686/libc-2.2.4.so > > > > is used. The 686 lib is working, the other is not. Investigation is > > > > underway.... > > > > > > > > So since you have /lib and /usr/lib in /etc/ld.so.conf I suggest taking > > > > those out and rerunning ldconfig. And make sure /lib:/usr/lib are not > > > > part of LD_LIBRARY_PATH. > > > > > > > > Note that the issue above is described in Bugzilla 86398 and 86359. > > > > > > > > -Connie Sieh > > > > Fermi National Accelerator Laboratory > > > > On Fri, 28 Mar 2003, Naum Stolarsky wrote: > > > > > > > > > replaced glibc-2.3.2 with glibc-2.2.5-93 > > > > > Same result... > > > > > Is there any problems if glibc -2.2.4-32 is used on > > > > > RH8.0? > > > > > > > > > > -----Original Message----- > > > > > From: psyche-list-admin@xxxxxxxxxx > > > > > [mailto:psyche-list-admin@xxxxxxxxxx]On Behalf Of Naum > > > > > Stolarskiy > > > > > Sent: Thursday, March 27, 2003 5:59 PM > > > > > To: psyche-list@xxxxxxxxxx > > > > > Subject: RE: Need help...Sybase12.5 > > > > > > > > > > > > > > > Here it is: > > > > > /lib > > > > > /usr/lib > > > > > /usr/lib/qt-1.45/lib > > > > > /usr/kerberos/lib > > > > > /usr/lib/wine > > > > > /usr/lib/mysql > > > > > /usr/lib/sane > > > > > /usr/sybase-12.5/lib > > > > > /usr/lib/qt-2.3.0/lib > > > > > /usr/lib/qt-3.0.5/lib > > > > > /usr/X11R6/lib > > > > > /opt/sybase-12.5/OCS/lib > > > > > /opt/sybase-12.5/ASE/lib > > > > > Naum. > > > > > > > > > > On Thu, 2003-03-27 at 17:52, csieh wrote: > > > > > > Naum, > > > > > > > > > > > > What are the contents of /etc/ld.so.conf and the > > > > > value of LD_LIBRARY_PATH. > > > > > > > > > > > > -Connie Sieh > > > > > > On Thu, 27 Mar 2003, csieh wrote: > > > > > > > > > > > > > Naum, > > > > > > > > > > > > > > What version of glibc do you have? > > > > > > > Any error messages? > > > > > > > > > > > > > > Connie Sieh > > > > > > > > > > > > > > On Thu, 27 Mar 2003, Naum Stolarsky > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > Here we go again... > > > > > > > > > > > > > > > > Did anybody installed Sybase 12.5 on RH8.0? > > > > > > > > What version of glibc do you have? > > > > > > > > My srvbuild can't create master.dat... > > > > > > > > Everything I've found so far points to glibc. > > > > > > > > Thanks in advance, > > > > > > > > Naum. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > Psyche-list mailing list > > > > Psyche-list@xxxxxxxxxx > > > > https://listman.redhat.com/mailman/listinfo/psyche-list > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > Psyche-list mailing list > > Psyche-list@xxxxxxxxxx > > https://listman.redhat.com/mailman/listinfo/psyche-list > > > > > > > -- > Psyche-list mailing list > Psyche-list@xxxxxxxxxx > https://listman.redhat.com/mailman/listinfo/psyche-list > -- Psyche-list mailing list Psyche-list@xxxxxxxxxx https://listman.redhat.com/mailman/listinfo/psyche-list