Did you read my early post???. You need to update your gphoto2 files and libraries. I had the same problem with my Canon PowerShot S45. After updating the GPhoto2 related stuff it worked!! Check out the web link in that post for more info. Wolf -----Original Message----- From: Pavel Rozenboim [mailto:pavelr@xxxxxxxxxxx] Sent: Monday, 17 March 2003 10:01 PM To: psyche-list@xxxxxxxxxx Subject: RE: Digital camera question > -----Original Message----- > From: Dan Devine [mailto:dannyboy259@xxxxxxxxx] > Sent: Thu, March 13, 2003 11:47 PM > To: RedHat 8.0 mailing list > Subject: Re: Digital camera question > > > On Thu, 2003-03-13 at 09:39, Thomas Dodd wrote: > > Pavel Rozenboim wrote: > > > Hi, > > > > > > I have Samsung digimax 410 camera. It can be connected to > PC with USB cable. > > > According to the /var/log/messages it is recognized as > USB mass storage > > > device and usb-storage and some scsi related modules (sg, > sd_mod and > > > probably some others) are loaded. I see its listing in > > > /proc/bus/usb/devices. I read somewhere on internet that > I should be able to > > > > Ity appears to have recognized the camera then. > > Not so fast.....I've had problems with mine too, and while it did show > up in the /proc/bus/usb/devices (it gave me the manufacturer id and > model id and whatnot) and in the /proc/scsi directory (as a connected > device), it still wasn't really recognized as a proper USB device and > I wasn't able to do anything with it (i.e. mount and unmount). > > I've found the best information on specific devices at the linux-usb > page. > > http://www.linux-usb.org/ > > check the supported devices for your model...... > > http://www.qbik.ch/usb/devices/search_res.php?pattern=samsung > I found Digimax 340 with a report that it doesn't work either. > You may be able to adapt the device info header for the Digimax 340 > series to work with the Digimax 410. I'm not sure what modules those > are in though. After you complete your mods (if they are not already > there), you will also have to recompile..... Where should I look for it? I tried to search the entire kernel tree for vendor id/vendor name but could not find anything appropriate. Are those drivers located in drivers/usb subdir? > > In my experience, I simply copied another header from a similar series > that was supported and modified the model code to match what I was > getting from the /proc/bus/usb/devices file. I also modified the text > description to match my model. This worked like a charm. > > You should be seeing 0x0839 or 0x0836 for the digimax series, > along with > a "model identifier" after that. I see vendor id 0x0839 and model id 0x000A. > > > > > > "just" mount it as scsi device. I tried to mount > /dev/sd[a-d][1-4] as well > > > as /dev/sd[a-d] devices, but always got an error that it > is not valid block > > > device. Do I need some camera specific driver? If not, > how so I find the > > > right device to mount? Does anyone have any experience > with this camera? > > > > #cat /prc/scsi/scsi > > > > That should list the scsi devices in your system. > > > > The output of lsusb and the dmesg results following the > hotplug event > > would be helpfull. So would lsmod output. > > > > -Thomas > -- > Dan Devine <dannyboy259@xxxxxxxxx> ###################################################################### Attention: This e-mail message is privileged and confidential. If you are not the intended recipient please delete the message and notify the sender. Any views or opinions presented are solely those of the author. This e-mail has been scanned and cleared by MailMarshal www.marshalsoftware.com ###################################################################### -- Psyche-list mailing list Psyche-list@xxxxxxxxxx https://listman.redhat.com/mailman/listinfo/psyche-list
