Hi ! All Recap, difficulty configuring 3c905b-tx card from OS. Unable to do so using mii-tool. Like to thank Leonard Miller for the solution Used 3c90xcfg.exe DOS utility from the 3com website to configure my NIC to 100Mb/s half duplex. Cheers Vikash ******************************************************************************************************* Disclaimer: The information contained in this communication is confidential and may be legally privileged. It is intended solely for the use of the individual or entity to whom it is addressed and others authorised to receive it. Any review, retransmission, dissemination, copying, disclosure or other use of, or taking of any action in reliance upon, this information by person or entities other then the intended recipient is prohibited. If you have received this message in error, please notify the sender immediately by e-mail, facsimile or telephone and return and/or destroy the original message and all copies from any computer. Kentron, a division of Denel (Pty) Ltd, exercises no editorial control over e-mail messages originating in the organisation and does not accept any responsibility for either the contents of the message or any copyright laws that may have been violated by the person sending this message. Kentron is neither liable for the proper and complete transmission of the information contained in this communication nor any delay in its receipt. This message should not be copied or used for any purpose other than intended, nor should it be disclosed to any other person. ******************************************************************************************************* -- Psyche-list mailing list Psyche-list@redhat.com https://listman.redhat.com/mailman/listinfo/psyche-list
