Could you pass along the route tables on your test workstation. Your problem may have to do with how they are configured. Or how the default gw for each subnet is configured. The redhat box looks good from what you have here. On Tue, 2005-01-04 at 14:16, toby wrote: > "Reinhard X. Fuerst" wrote: > > > > Hi, > > > > i have a little network with 2 segments: > > net A -> 192.168.0.x, Mask 255.255.255.0 > > net B -> 192.168.2.x, Mask 255.255.255.0 > > > > One Linux-RH8-Computer (my gateway) has 2 ethernet cards: > > eth0 -> 192.168.2.1 (255.255.255.0) > > eth1 -> 192.168.0.66 (255.255.255.0) > > > > ping from Gateway in both nets possible > > ping from net A to gateway possible > > ping from net B to gateway possible > > > > BUT ping from one network to the other: NOT possible > > As gateway adress i put in computers on net A 192.168.0.66 > > and in computers on net B 192.168.2.1 > > > > in the gateway-computer i have /proc/sys/net/ipv4/ip_forward = 1 > > > > route (on gw) gives: > > --------------------------- > > Kernel IP Routentabelle > > Ziel Router Genmask Flags Metric Ref Use Iface > > 192.168.2.0 * 255.255.255.0 U 0 0 0 eth0 > > 192.168.0.0 * 255.255.255.0 U 0 0 0 eth1 > > 127.0.0.0 * 255.0.0.0 U 0 0 0 lo > > ------------------------------ > > > > Why doesn't it route the packets from one net to the other? > > > > Any help appreciated > > > > Reinhard > > > > > Do you have routed or gated running? > > > > -tkb > > -- Psyche-list mailing list Psyche-list@redhat.com https://listman.redhat.com/mailman/listinfo/psyche-list
