All: I'm trying to get my Logitech QuickCam working: 1. /sbin/lsmod yields Module Size Used by Not tainted mod_quickcam 42224 0 videodev 8288 1 [mod_quickcam] usb-uhci 26188 0 (unused) usbcore 77024 1 [mod_quickcam audio hid usb-uhci] 2. /proc/bus/usb/devices shows I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS= 8 #Cfgs= 1 P: Vendor=046d ProdID=08f0 Rev= 1.00 S: Product=Camera 3. ls /dev/vid* shows crw------- 1 nhodge root 81, 0 Aug 30 16:31 /dev/video0 crw------- 1 nhodge root 81, 1 Aug 30 16:31 /dev/video1 crw------- 1 nhodge root 172, 0 Aug 30 16:31 /dev/video1394 crw------- 1 nhodge root 81, 2 Aug 30 16:31 /dev/video2 crw------- 1 nhodge root 81, 3 Aug 30 16:31 /dev/video3 4. xawtv returns the following: [nhodge@zeus qce-ga-0.40c]$ xawtv This is xawtv-3.74, running on Linux/i686 (2.4.18-19.8.0) can't open /dev/video0: No such device v4l2: open /dev/video0: No such device v4l: open /dev/video0: No such device no video grabber device available Any ideas? Thanks. Neil Hodge -- Psyche-list mailing list Psyche-list@redhat.com https://listman.redhat.com/mailman/listinfo/psyche-list