On Wednesday 25 December 2002 21:45, Justin Zygmont uttered: > I have tested some different things out and it seems to work ok now. What > I noticed is that the partitioning on the drives should be the same if you > want to raid / and be able to boot any drive individually to simulate a > failure. Otherwise you'll have to edit the grub line (if you can > get to one) and change the hd=x,x line to whetever it should be for the > differently partitioned drive. However, using one drive, I switched it > from the hda to hdc or vice versa, it would still boot because it is > hd=0,0. I upgraded the kernel and even made some other changes and it > still worked fine, so I don't see the need for a seperate /boot partition > afterall. You can also install grub on both harddrives, and then your bios will boot what ever disk it comes to first. Since raid partitions are really just Linux partitions under a different name, this works. -- Jesse Keating RHCE MCSE For Web Services and Linux Consulting, Visit --> j2Solutions.net Mondo DevTeam (www.mondorescue.org) Was I helpful? Let others know: http://svcs.affero.net/rm.php?r=jkeating -- Psyche-list mailing list Psyche-list@redhat.com https://listman.redhat.com/mailman/listinfo/psyche-list
