visor and redhat 8.0 sync

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



If one of your RH8.0 users could help me.

some days ago I succeeded (after making ln -s /dev/pilot
/dev/usb/ttyUSB1 )
 in getting the visor connected with rh8.0, even synching with
evolution. now nothink won't work at all.

maybee for reasons I don't know the cradle is linked to another USB
port?

dmesg shows:


[christoph@christophl christoph]$ dmesg
Linux version 2.4.18-18.8.0 (bhcompile@daffy.perf.redhat.com) (gcc
version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Thu Nov 14 00:10:29
EST 2002
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
 BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
 BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000ff60000 (usable)
 BIOS-e820: 000000000ff60000 - 000000000ff7a000 (ACPI data)
 BIOS-e820: 000000000ff7a000 - 000000000ff7c000 (ACPI NVS)
 BIOS-e820: 000000000ff7c000 - 0000000010000000 (reserved)
 BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
255MB LOWMEM available.
On node 0 totalpages: 65376
zone(0): 4096 pages.
zone(1): 61280 pages.
zone(2): 0 pages.
IBM machine detected. Enabling interrupts during APM calls.
Kernel command line: ro root=LABEL=/ hdc=ide-scsi
ide_setup: hdc=ide-scsi
Initializing CPU#0
Detected 1998.468 MHz processor.
Speakup v-1.00 CVS: Tue Jun 11 14:22:53 EDT 2002 : initialized
Console: colour VGA+ 80x25
Calibrating delay loop... 3970.35 BogoMIPS
Memory: 252496k/261504k available (1314k kernel code, 6580k reserved,
989k data, 172k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 4096 (order: 3, 32768 bytes)
ramfs: mounted with options: <defaults>
ramfs: max_pages=31817 max_file_pages=0 max_inodes=0 max_dentries=31817
Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Before vendor init, caps: 3febf9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 0K, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After vendor init, caps: 3febf9ff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 3febf9ff 00000000 00000000 00000000
CPU:             Common caps: 3febf9ff 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) 4 Mobile CPU 2.00GHz stepping 04
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfd8fe, last bus=8
PCI: Using configuration type 1
PCI: Probing PCI hardware
Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bridge
PCI: Discovered primary peer bus 09 [IRQ]
PCI: Using IRQ router PIIX [8086/248c] at 00:1f.0
PCI: Found IRQ 11 for device 00:1f.1
PCI: Sharing IRQ 11 with 00:1d.2
PCI: Sharing IRQ 11 with 02:00.2
PCI: Sharing IRQ 11 with 02:02.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
speakup:  initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Starting kswapd
VFS: Diskquotas version dquot_6.5.0 initialized
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI ISAPNP enabled
PCI: Found IRQ 11 for device 00:1f.6
PCI: Sharing IRQ 11 with 00:1f.3
PCI: Sharing IRQ 11 with 00:1f.5
PCI: Sharing IRQ 11 with 02:00.1
Real Time Clock Driver v1.10e
block: 480 slots per queue, batch=120
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
PIIX4: IDE controller on PCI bus 00 dev f9
PCI: Enabling device 00:1f.1 (0005 -> 0007)
PCI: Found IRQ 11 for device 00:1f.1
PCI: Sharing IRQ 11 with 00:1d.2
PCI: Sharing IRQ 11 with 02:00.2
PCI: Sharing IRQ 11 with 02:02.0
PIIX4: chipset revision 2
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio
hda: IC25T060ATCS05-0, ATA DISK drive
hdc: UJDA730 DVD/CDRW, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c03afd84, I/O limit 4095Mb (mask 0xffffffff)
blk: queue c03afd84, I/O limit 4095Mb (mask 0xffffffff)
hda: 117210240 sectors (60012 MB) w/1768KiB Cache, CHS=7752/240/63,
UDMA(100)
ide-floppy driver 0.99.newide
Partition check:
 hda: hda1 hda2 hda3 hda4 < hda5 hda6 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 128k freed
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 172k freed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 00:32:08 Nov 14 2002
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 11 for device 00:1d.0
PCI: Sharing IRQ 11 with 01:00.0
PCI: Sharing IRQ 11 with 02:00.0
PCI: Setting latency timer of device 00:1d.0 to 64
usb-uhci.c: USB UHCI at I/O 0x1800, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 11 for device 00:1d.1
PCI: Setting latency timer of device 00:1d.1 to 64
usb-uhci.c: USB UHCI at I/O 0x1820, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 11 for device 00:1d.2
PCI: Sharing IRQ 11 with 00:1f.1
PCI: Sharing IRQ 11 with 02:00.2
PCI: Sharing IRQ 11 with 02:02.0
PCI: Setting latency timer of device 00:1d.2 to 64
usb-uhci.c: USB UHCI at I/O 0x1840, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
hub.c: USB new device connect on bus2/2, assigned device number 2
input0: USB HID v1.10 Mouse [Logitech USB Receiver] on usb2:2.0
EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,5), internal journal
Adding Swap: 521600k swap-space (priority -1)
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,3), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ohci1394: $Revision: 1.101 $ Ben Collins <bcollins@debian.org>
PCI: Found IRQ 11 for device 02:00.2
PCI: Sharing IRQ 11 with 00:1d.2
PCI: Sharing IRQ 11 with 00:1f.1
PCI: Sharing IRQ 11 with 02:02.0
ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[11]  MMIO=[d0201000-d0201800]  Max
Packet=[2048]
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: MATSHITA  Model: UJDA730 DVD/CDRW  Rev: 1.04
  Type:   CD-ROM                             ANSI SCSI revision: 02
ieee1394: Host added: Node[00:1023]  GUID[00061b0010040361]  [Linux
OHCI-1394]
parport0: PC-style at 0x3bc [PCSPP,TRISTATE]
ip_tables: (C) 2000-2002 Netfilter core team
eepro100.c:v1.09j-t 9/29/99 Donald Becker
http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin
<saw@saw.sw.com.sg> and others
PCI: Found IRQ 11 for device 02:08.0
divert: allocating divert_blk for eth0
eth0: Intel Corp. 82801CAM (ICH3) Chipset Ethernet Controller,
00:D0:59:CC:8D:E7, IRQ 11.
  Board assembly 000000-000, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x04f4518b).
Linux Kernel Card Services 3.1.22
  options:  [pci] [cardbus] [pm]
PCI: Found IRQ 11 for device 02:00.0
PCI: Sharing IRQ 11 with 00:1d.0
PCI: Sharing IRQ 11 with 01:00.0
PCI: Found IRQ 11 for device 02:00.1
PCI: Sharing IRQ 11 with 00:1f.3
PCI: Sharing IRQ 11 with 00:1f.5
PCI: Sharing IRQ 11 with 00:1f.6
Yenta IRQ list 06b8, PCI irq11
Socket status: 30000410
Yenta IRQ list 06b8, PCI irq11
Socket status: 30000006
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x3b8-0x3df 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
ttyS0 at port 0x03f8 (irq = 3) is a 16550A
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: Detected Intel i845 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
[drm] AGP 0.99 on Unknown @ 0xe0000000 64MB
[drm] Initialized radeon 1.1.1 20010405 on minor 0
Intel 810 + AC97 Audio, version 0.22, 00:35:10 Nov 14 2002
PCI: Found IRQ 11 for device 00:1f.5
PCI: Sharing IRQ 11 with 00:1f.3
PCI: Sharing IRQ 11 with 00:1f.6
PCI: Sharing IRQ 11 with 02:00.1
PCI: Setting latency timer of device 00:1f.5 to 64
i810: Intel ICH3 found at IO 0x18c0 and 0x1c00, IRQ 11
i810_audio: Audio Controller supports 6 channels.
i810_audio: Defaulting to base 2 channel mode.
ac97_codec: AC97 Audio codec, id: 0x4144:0x5348 (Analog Devices AD1881A)
i810_audio: AC'97 codec 0 Unable to map surround DAC's (or DAC's not
present), total channels = 2
ac97_codec: AC97 Modem codec, id: 0x5349:0x4c27 (Unknown)
i810_audio: timed out waiting for codec 1 analog ready.
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12


if anybody using visor with rh8.0 I would be very grateful for any help

cheers

christoph
-- 
Christoph Lehmann 
Department of Psychiatric Neurophysiology 
University Hospital of Clinical Psychiatry 
Waldau 
CH-3000 Bern 60 
Switzerland 

Phone:  ++41 31 930 93 83 
Fax:    ++41 31 930 96 61 
Email:  lehmann@puk.unibe.ch 
Web:    



-- 
Psyche-list mailing list
Psyche-list@redhat.com
https://listman.redhat.com/mailman/listinfo/psyche-list

[Index of Archives]     [Fedora General Discussion]     [Red Hat General Discussion]     [Centos]     [Kernel]     [Red Hat Install]     [Red Hat Watch]     [Red Hat Development]     [Red Hat 9]     [Gimp]     [Yosemite News]

  Powered by Linux