Hello all,
I have an Imation SuperDisk 120 (model SD-USB-M) external USB drive that
I can't seem to be able to get working. The error I see in
/var/log/messages is:
hub.c: USB new device connect on bus1/2/3, assigned device number 3
usb.c: USB device 3 (vend/prod 0x4e6/0x1) is not claimed by any active
driver.
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
scsi1 : SCSI emulation for USB Mass Storage devices
blk: queue c03afd84, I/O limit 4095Mb (mask 0xffffffff)
usb-uhci.c: interrupt, status 3, frame# 894
scsi: device set offline - not ready or command retry failed after bus
reset: host
1 channel 0 id 0 lun 0
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 3
USB Mass Storage support registered.
The output of dmesg is:
Dec 4 00:10:35 localhost kernel: hub.c: USB new device connect on
bus1/2/3, assigned device number 4
Dec 4 00:10:39 localhost /etc/hotplug/usb.agent: Setup usb-storage for
USB product 4e6/1/200
Dec 4 00:10:39 localhost modprobe: modprobe: Can't locate module
block-major-2
Dec 4 00:10:39 localhost last message repeated 3 times
some other outputs follow:
[root@localhost root]# cat /proc/bus/usb/drivers
usbdevfs
hub
96-111: hiddev
hid
usb-storage
[root@localhost root]# cat /proc/scsi/usb-storage-0/1
Host scsi1: usb-storage
Vendor: Shuttle Technology Inc.
Product: E-USB Bridge
Serial Number: None
Protocol: 8020i
Transport: Control/Bulk
GUID: 04e600010000000000000000
Attached: Yes
I have researched all over the Internet for errors relating to
block-major-2 not being found, and there seems to be plenty of
references for this error, but I could not find a solution. Don't know
if this is important, but I *am* able to mount external USB hard drives
to this same system and mount it as /dev/sda1 without any extra work...
Please help!
Thanks in advance.
--
Psyche-list mailing list
Psyche-list@redhat.com
https://listman.redhat.com/mailman/listinfo/psyche-list
