RE: 2 hard drives, swap ide controllers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



After switching the cables, I attempted to boot up and got nowhere.  So
I booted in rescue mode and attempted to run the grub-install.  After a
couple of failed attempts, I have switched the drives back to the
original configuration.  I can boot into Psyche, but M$ is not booting.
Which gives me a reason to trash that hard drive and start over on it.
:)

Thanx for the advice...  

James


-----Original Message-----
From: Rinaldi J. Montessi [mailto:chief-curmudgeon@subdimension.com] 
Sent: Wednesday, November 13, 2002 7:52 PM
To: psyche-list@redhat.com
Subject: Re: 2 hard drives, swap ide controllers


> James Gilpin wrote:
> 
> ok.  i did a silly thing.
> 
> i have 2 hard drives and i am trying to move the hdd drive (containing
> redhat) to my primary controller and the hda drive (containing M$) to 
> the secondary controller.  (the secondary controller has a ide cdrom 
> on it and i thought i might be able to improve performance by changing

> the controllers)
> 
> i changed the grub.conf and fstab files, but on reboot i never get the

> grub loader.  is it something to do with my mbr record?

Probably yes.  Did you run grub-install /dev/hda after switching the
drives?  

Rinaldi
-- 
By all means marry. If you get a good wife you will become happy, 
and if you get a bad one you will become a philosopher. --Socrates



-- 
Psyche-list mailing list
Psyche-list@redhat.com
https://listman.redhat.com/mailman/listinfo/psyche-list



-- 
Psyche-list mailing list
Psyche-list@redhat.com
https://listman.redhat.com/mailman/listinfo/psyche-list

[Index of Archives]     [Fedora General Discussion]     [Red Hat General Discussion]     [Centos]     [Kernel]     [Red Hat Install]     [Red Hat Watch]     [Red Hat Development]     [Red Hat 9]     [Gimp]     [Yosemite News]

  Powered by Linux