Interesting. The only difference is that mine reports in as revision 91
instead of 90. Otherwise, everything you have is something set on mine.
Output below:
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900
10/100 Ethernet (rev 91)
It is also enabled in the CMOS settings.
I think something has changed with a driver in the new revision - anyone
running a Rev 91 edition of this controller and have it working?
Cheers,
Chris Williams
On Thu, 2002-11-07 at 11:08, Randy Kelsoe wrote:
Dan Clowater wrote:
>Hey Chris - I have a SIS900 onboard NIC and its working great - 7.3 and
>8.0 seemed to find it and operate it AOK. Have you tried the NIC in
>windows or some other OS? The NIC may be faulty and it may not be a
>config issue... could mean you need a new MOBO - or use a secondary
>card. Just as a thought is the NIC enabled in the bios? Mine was not
>initially and I had to change that to make it work.
>
>Sorry I can't be of more help - good luck! :)
>
>
>
Mine is working fine also. in my /etc/modules.conf I have the entry:
alias eth0 sis900
What do you see if you do an lspci? I show:
00:03.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900
10/100 Ethernet (rev 90)
Have you looked at you BIOS settings, just to make sure it's not DISABLED?
I'm using an ECS K7S5A mobo.
--
Psyche-list mailing list
Psyche-list@redhat.com
https://listman.redhat.com/mailman/listinfo/psyche-list
--
====================================
"If you get to thinkin' you're a
person of some influence, try
orderin' someone else's dog around."
--Cowboy Wisdom
--
Psyche-list mailing list
Psyche-list@redhat.com
https://listman.redhat.com/mailman/listinfo/psyche-list
