On Sun, 2002-10-20 at 22:58, Keith Morse wrote: > On 20 Oct 2002, Keith Winston wrote: > > > On Sat, 2002-10-19 at 23:14, Keith Morse wrote: > > > > There is some key combination (Alt-F10 or something) that should let you > > bring up the BIOS on the megaraid controller when it boots, then you > > should be able to look at the current settings and adjust them if > > necessary. > > I've been muddling thru the different bios configurations in a effort to > identify the resources this card uses. No success there either. The > names used on either side of the fence don't correlate so its a trial and > error affair. In researching the documentation I've found on RedHat's web > site, it appears that the megaraid.o modules accepts no options arguments. > > I finally whimped out and installed a 4gb scsi hard drive just to get the > OS loaded. I'll continue trouble shooting from there. Thanks for your > efforts. If I were in your situation, I would check with the Dell resources for Linux. I do not know anything about them other than these links: http://www.dell.com/linux/ http://domsch.com/linux http://lists.us.dell.com/ Good luck, Ryan -- Powered by Red Hat Linux 8.0 -- Psyche-list mailing list Psyche-list@redhat.com https://listman.redhat.com/mailman/listinfo/psyche-list
