Arjan van de Ven wrote: >On Sun, 2002-10-13 at 17:52, Randall J. Parr wrote: > > >>Arjan van de Ven wrote: >> >> >On Sun, 2002-10-13 at 03:44, Randall J. Parr wrote: >> > >> > >> >>I have installed RH8 several times now and it has always detected the >> >>NIC card (some required updated drivers later but it detected them). >> >> >> >> >> > >> >can you give the PCI ID of the card? that's the easiest way of seeing if >> >we have a driver for your card ;) (and it also tells me what to add to >> >3c59x.c to add support if needed) >> > >> > >> >>Now I've hit a system where RH8 doesn't detect the NIC card at all. >> >>(the system, as is, was operating fine under W2K so I know hw is working) >> >> >> >> >>from 3Com readme >>(http://support.3com.com/infodeli/tools/nic/linux/3c990-24readme.txt) >> >>The 3C990 NIC driver for Linux supports the following EtherLink NICs: >> >> > >I was asking what YOUR pci id was. > during boot, my BIOS reports PCI bus 0, device 16, "network controller" with vendor 10B7, device 9903, class 0200 on IRQ 10 (it is the only thing on IRQ 10)
