On Mon, 2003-02-10 at 13:45, root wrote: > I am running RH 8.0, Xfree 4.2.0 from distro and 2 ATI cards : > > - ATI radeon 8500 DV AGP > - ATI Radeon 7500 PCI > Try this modified XF86Config. In your XF86Config you were not specifying which device was which screen. This modified config should fix your problem. Regards, Jim H
# File generated by anaconda. # Section "ServerLayout" Identifier "Anaconda Configured" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" # Screen 1 "Screen1" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" # The location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. # Multiple FontPath entries are allowed (they are concatenated together) # By default, Red Hat 6.0 and later now use a font server independent of # the X server to render fonts. RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "unix/:7100" EndSection Section "Module" Load "dbe" Load "extmod" # Load "fbdevhw" # Load "dri" # Load "glx" # Load "record" Load "freetype" Load "type1" EndSection Section "InputDevice" # Option "AutoRepeat" "500 5" # when using XQUEUE, comment out the above line, and uncomment the # following line # Option "Protocol" "Xqueue" # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) # Option "Xleds" "1 2 3" # To disable the XKEYBOARD extension, uncomment XkbDisable. # Option "XkbDisable" # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use: # Option "XkbModel" "pc102" # If you have a US Microsoft Natural keyboard, you can use: # Option "XkbModel" "microsoft" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # Option "XkbLayout" "de" # or: # Option "XkbLayout" "de" # Option "XkbVariant" "nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # Option "XkbOptions" "ctrl:swapcaps" #Option "XkbOptions" "" Identifier "Keyboard0" Driver "keyboard" Option "XkbRules" "xfree86" Option "XkbModel" "pc105" Option "XkbLayout" "us" #Option "XkbVariant" "" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "IMPS/2" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5" Option "Emulate3Buttons" "no" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" HorizSync 30.0 - 96.0 VertRefresh 50.0 - 160.0 Option "dpms" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Monitor Vendor" ModelName "Monitor Model" HorizSync 30.0 - 96.0 VertRefresh 50.0 - 160.0 Option "dpms" EndSection Section "Device" # Some 7500 boards aparently need this option enabled to work - bug (#62760) # Option "CrtScreen" Identifier "ATI Radeon 8500" Driver "radeon" VendorName "ati" BoardName "ati" BusID "PCI:1:0:0" Screen 0 EndSection Section "Device" # Some 7500 boards aparently need this option enabled to work - bug (#62760) # Option "CrtScreen" Identifier "ATI Radeon 7500" Driver "radeon" VendorName "ati" BoardName "ati" BusID "PCI:0:9:0" Screen 1 EndSection Section "Screen" Identifier "Screen0" Device "ATI Radeon 8500" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "ATI Radeon 7500" Monitor "Monitor1" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" EndSubSection EndSection Section "DRI" # Mode 0666 EndSection
