Andrew Thomson (ajthomson@xxxxxxxxxxxxxxxx) said: > anyone know how pcitable works with loading modules?? Yup. > > megaraid: v1.18c (Release Date: Thu May 16 10:27:55 EDT 2002) > megaraid: found 0x1000:0x1960:idx 0:bus 3:slot 9:func 0 > scsi0 : Found a MegaRAID controller at 0xf8842000, IRQ: 27 > megaraid: [1L19:1.04] detected 1 logical drives > megaraid: supports extended CDBs. > megaraid: channel[1] is raid. > scsi0 : LSI Logic MegaRAID 1L19 254 commands 15 targs 4 chans 7 luns > Vendor: MegaRAID Model: LD0 RAID1 70086R Rev: 1L19 > > and from pcitable > > 0x1000 0x1960 "unknown" "LSI Logic / Symbios Logic|PowerEdge Expandable RAID Controller 4" > 0x1000 0x1960 0x1028 0x0518 "megaraid" "Dell Computer Corporation|PowerEdge Expandable RAID Controller 4/DC" > 0x1000 0x1960 0x1028 0x0520 "megaraid" "Dell Computer Corporation|PowerEdge Expandable RAID Controller 4/SC" > 0x1000 0x1960 0x1028 0x0531 "megaraid" "Dell Computer Corporation|PowerEdge Expandable RAID Controller 4/QC" > > I updated hwdata from rawhide to get the latest and greatest.. could > this be why the installer isn't loading the megaraid driver?? What's the output of lspci -v for the card in question? It's not listed specifically becasue not all 0x1000 0x1960 cards are megaraids. Bill _______________________________________________ Redhat-devel-list mailing list Redhat-devel-list@xxxxxxxxxx https://listman.redhat.com/mailman/listinfo/redhat-devel-list
