Dhcpcd and Pump

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Check out the skipjack beta, 7.2.93, the kernel is 2.4.18.  I upgraded a 7.2
machine to skipjack, my home firewall and had no problems with dhcp.
Includes a bunch of newer item, KDE 3.0.  This is beta so BBW.  Should be a
better than rawhide though.

-----Original Message-----
From: Luc Perin [mailto:redhat@perin.org]
Sent: Wednesday, April 10, 2002 3:12 PM
To: redhat-devel-list@redhat.com
Subject: Dhcpcd and Pump


Hello,

I have installed kernel 2.4.18 in my system and I notice that dhcpcd and
pump seem to be broken. When I go back to 2.4.9 it works fine. I have gone
from 2.4.18 back to 2.4.9 and then back to 2.4.18 and it is repeatable. Im
not sure what changes as far as network code to cause this. Is there some
thing I can change to get dhcpcd working in 2.4.18? The system is RH7.2 with
all the current up2date patched installed. The only packages from the
rawhide distribution is the 2.4.18 kernel and its dependicies reported when
I instazlled it via rpm -Uvh . I do change the mac address on eth0 to match
what my ISP (Mediaone a.k.a. AT&T Broadband, aka attbi.com,) has for my
account. The mac address is changed in ifcfg-eth0 as shown below. The system
has 2 interfaces and one connects to the ISP and the other to a switch on my
internal lan. Every thing else works fine under 2.4.18. The reason I am
using it is to get full capacity from my 160GB maxtor drives. If there is a
way I can get 48 bit addressing under kernel 2.4.9 I would pursue that as
well. Thanks for all assistance!
Luc

/etc/sysconfig/networking/devices/ifcfg-eth0:
DEVICE=eth0

BOOTPROTO=dhcp

ONBOOT=yes

TYPE=Ethernet

HWADDR=00:a0:c5:e1:43:df

USERCTL=no

PEERDNS=no        .



Here is the versions That I have installed under 2.4.9
[root@funkybox root]# rpm -q kernel
kernel-2.4.7-10
kernel-2.4.9-31
[root@funkybox root]# rpm -q dhcpcd
dhcpcd-1.3.21pl2-6
[root@funkybox root]# rpm -q pump
pump-0.8.11-7
[root@funkybox root]# 

 The files I have been using are:

[root@funkybox Dhcp]# ls -l
total 21980
-rw-r--r--    1 root     root        28926 Apr 10 05:47
dhcpcd-1.3.21pl2-6.i386.rpm
-rw-r--r--    1 root     root       187711 Apr 10 05:48
ipchains-1.3.10-13.i386.rpm
-rw-r--r--    1 root     root       146609 Apr 10 03:29
iptables-1.2.5-3.i386.rpm
-rw-r--r--    1 root     root       118636 Apr 10 03:33
iptables-ipv6-1.2.5-3.i386.rpm
-rw-r--r--    1 root     root     12182007 Apr 10 03:11
kernel-2.4.18-0.18.i686.rpm
-rw-r--r--    1 root     root      9745668 Apr 10 04:06
kernel-2.4.7-10.i686.rpm
-rw-r--r--    1 root     root        37384 Apr 10 05:47
pump-0.8.11-7.i386.rpm


here is a clip of the 2.4.18 /var/log/messages file:

pr 10 05:58:51 funkybox kernel: Loaded 219 symbols from 10 modules.

Apr 10 05:58:51 funkybox kernel: Linux version 2.4.18-0.18
(bhcompile@daffy.perf.redhat.com) (gcc version 2.96 20000731 (Red Hat Linux
7.2 2.96-109)) #1 Mon Apr 8 5:19:25 EDT 002


_______________________________________________
Redhat-devel-list mailing list
Redhat-devel-list@redhat.com
https://listman.redhat.com/mailman/listinfo/redhat-devel-list





[Index of Archives]     [Kernel Newbies]     [Red Hat General]     [Fedora]     [Red Hat Install]     [Linux Kernel Development]     [Yosemite News]

  Powered by Linux