Dhcpcd and Pump

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a multi-part message in MIME format.

------=_NextPart_000_0032_01C1E0A2.202BF500
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

Hello,

I have installed kernel 2.4.18 in my system and I notice that dhcpcd and =
pump seem to be broken. When I go back to 2.4.9 it works fine. I have =
gone from 2.4.18 back to 2.4.9 and then back to 2.4.18 and it is =
repeatable. Im not sure what changes as far as network code to cause =
this. Is there some thing I can change to get dhcpcd working in 2.4.18? =
The system is RH7.2 with all the current up2date patched installed. The =
only packages from the rawhide distribution is the 2.4.18 kernel and its =
dependicies reported when I instazlled it via rpm -Uvh . I do change the =
mac address on eth0 to match what my ISP (Mediaone a.k.a. AT&T =
Broadband, aka attbi.com,) has for my account. The mac address is =
changed in ifcfg-eth0 as shown below. The system has 2 interfaces and =
one connects to the ISP and the other to a switch on my internal lan. =
Every thing else works fine under 2.4.18. The reason I am using it is to =
get full capacity from my 160GB maxtor drives. If there is a way I can =
get 48 bit addressing under kernel 2.4.9 I would pursue that as well. =
Thanks for all assistance!
Luc

/etc/sysconfig/networking/devices/ifcfg-eth0:
DEVICE=3Deth0                                                            =
                                                            =20
BOOTPROTO=3Ddhcp                                                         =
                                                            =20
ONBOOT=3Dyes                                                             =
                                                            =20
TYPE=3DEthernet                                                          =
                                                            =20
HWADDR=3D00:a0:c5:e1:43:df                                               =
                                                            =20
USERCTL=3Dno                                                             =
                                                            =20
PEERDNS=3Dno        .



Here is the versions That I have installed under 2.4.9
[root@funkybox root]# rpm -q kernel
kernel-2.4.7-10
kernel-2.4.9-31
[root@funkybox root]# rpm -q dhcpcd
dhcpcd-1.3.21pl2-6
[root@funkybox root]# rpm -q pump
pump-0.8.11-7
[root@funkybox root]#=20

 The files I have been using are:

[root@funkybox Dhcp]# ls -l
total 21980
-rw-r--r--    1 root     root        28926 Apr 10 05:47 =
dhcpcd-1.3.21pl2-6.i386.rpm
-rw-r--r--    1 root     root       187711 Apr 10 05:48 =
ipchains-1.3.10-13.i386.rpm
-rw-r--r--    1 root     root       146609 Apr 10 03:29 =
iptables-1.2.5-3.i386.rpm
-rw-r--r--    1 root     root       118636 Apr 10 03:33 =
iptables-ipv6-1.2.5-3.i386.rpm
-rw-r--r--    1 root     root     12182007 Apr 10 03:11 =
kernel-2.4.18-0.18.i686.rpm
-rw-r--r--    1 root     root      9745668 Apr 10 04:06 =
kernel-2.4.7-10.i686.rpm
-rw-r--r--    1 root     root        37384 Apr 10 05:47 =
pump-0.8.11-7.i386.rpm


here is a clip of the 2.4.18 /var/log/messages file:

pr 10 05:58:51 funkybox kernel: Loaded 219 symbols from 10 modules.      =
                                                         =20
Apr 10 05:58:51 funkybox kernel: Linux version 2.4.18-0.18 =
(bhcompile@daffy.perf.redhat.com) (gcc version 2.96 20000731 (Red Hat =
Linux 7.2 2.96-109)) #1 Mon Apr 8 5:19:25 EDT 002                        =
                                                           =20



[Index of Archives]     [Kernel Newbies]     [Red Hat General]     [Fedora]     [Red Hat Install]     [Linux Kernel Development]     [Yosemite News]

  Powered by Linux