Is is fine. The output of sar, free, top, and vmstat are all agreeing that you have about 3.4GB mem used (~82%) with about 750MB free. The kbbuffers and kbcached from sar agrees with buffers (.48 GB) and cached (.56 GB) from free. The buff and cached from vmstat also agrees. Now if you look at the -/+ buffers/cache line from free, you will see that you really only have 2.36GB used and 1.78GB free if you don't count buffers and cache. 2.36GB + .48GB + .56GB = 3.4GB used. So you have about a gig of memory tied up in buffers and cache that could be freed if needed by the system. Further, you only have 40MB (8%) of swap used. If you were starved for memory this would be higher and your cache and buffers would be lower. > -----Original Message----- > From: redhat-list-bounces@xxxxxxxxxx [mailto:redhat-list- > bounces@xxxxxxxxxx] On Behalf Of ESGLinux > Sent: Wednesday, March 17, 2010 5:44 AM > To: General Red Hat Linux discussion list > Subject: confused with memory usage, sar, top, free, vmstat > > Hi all, > > I have a server that I think is having problems with memory usage but > when I > try to analize with different tools I´m not sure if I having problems > with > it > > If I run sar -r: > ... > 04:50:01 kbmemfree kbmemused %memused kbbuffers kbcached kbswpfree > kbswpused %swpused kbswpcad > 09:05:01 748036 3401232 81,97 448672 599232 > 3768868 327664 8,00 40456 > 09:10:01 749596 3399672 81,93 480028 560856 > 3768868 327664 8,00 40456 > 09:15:01 749020 3400248 81,95 481144 559740 > 3768868 327664 8,00 40456 > 09:20:01 749516 3399752 81,94 481812 559332 > 3768868 327664 8,00 40456 > 09:25:01 749676 3399592 81,93 481928 559216 > 3768868 327664 8,00 40456 > ... > > free > total used free shared > buffers cached > Mem: 4149268 3407624 741644 0 481084 > 566300 > -/+ buffers/cache: 2360240 1789028 > Swap: 4096532 327664 3768868 > > vmstat 1 > procs -----------memory---------- ---swap-- -----io---- --system-- > ----cpu---- > r b swpd free buff cache si so bi bo in cs us > sy id > wa > 0 0 327664 741412 481444 566200 1 1 10 56 0 2 2 > 1 96 > 1 > 0 0 327664 741412 481452 566192 0 0 0 24 1017 880 1 > 0 99 > 1 > 0 0 327664 741428 481460 566184 0 0 0 60 1012 812 0 > 0 99 > 1 > 0 0 327664 741428 481460 566184 0 0 0 0 1008 835 0 > 0 100 > 0 > 2 1 327664 741428 481464 566180 0 0 0 12 1020 859 0 > 0 100 > 0 > > top -b -d 1 -n 1 > top - 09:37:02 up 141 days, 20:15, 1 user, load average: 0.00, 0.02, > 0.03 > Tasks: 115 total, 1 running, 114 sleeping, 0 stopped, 0 zombie > Cpu(s): 1.6% us, 0.6% sy, 0.2% ni, 96.4% id, 1.2% wa, 0.0% hi, > 0.0% si > Mem: 4149268k total, 3408280k used, 740988k free, 481752k > buffers > Swap: 4096532k total, 327664k used, 3768868k free, 566152k cached > > I have read that linux try to allocate all the RAM memory, so the real > free > memory is the free + buffers/cache, is it true? if so, the %memused > shown by > sar -r is not true? > > Can anybody give a light to understand this (docs, tools...)? with the > commands I have post do you think that I´m having problems with the > memory > or can I be calm? > > Thanks in advance > > ESG > -- > redhat-list mailing list > unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe > https://www.redhat.com/mailman/listinfo/redhat-list -- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list
