RE: Reg : RHEL 5.0 Installatio

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



You might have a faulty piece of hardware somewhere..

-----Original Message-----
From: redhat-list-bounces@xxxxxxxxxx
[mailto:redhat-list-bounces@xxxxxxxxxx] On Behalf Of Ramakrishnan
Seshadhri
Sent: Sunday, 3 May 2009 10:37 p.m.
To: General Red Hat Linux discussion list
Subject: Re: Reg : RHEL 5.0 Installatio

Yes,

I am aware of that. I believe so far I haven't posted any sensitive
data.
(Ip address is anyway should be given)
I will try the test. Actually last time I was not able to connect at
all.
After a reboot I was able to connect. But still load is 2.8+.

Ram

On Sun, May 3, 2009 at 2:31 PM, Geofrey Rainey
<Geofrey.Rainey@xxxxxxxxxx>wrote:

> Weird, you shouldn't be getting any packet loss at all. I wonder if
> there's
> Some faulty network device? Try these tests:
>
> 1. Ping from yourself to yourself; ping localhost, and ping the proper
> qualified domain name - do you get any drops then?
>
> 2. Ping from another host on the same subnet, do you get any drops
then?
>
> 3. ping from a host on a different subnet.
>
> (also, in future be weary of transmitting lots of information about
your
> servers to a mailing list, your info might be posted on the internet -
> just be mindful of that).
>
>
> -----Original Message-----
> From: redhat-list-bounces@xxxxxxxxxx
> [mailto:redhat-list-bounces@xxxxxxxxxx] On Behalf Of Ramakrishnan
> Seshadhri
> Sent: Sunday, 3 May 2009 10:25 p.m.
> To: General Red Hat Linux discussion list
> Subject: Re: Reg : RHEL 5.0 Installatio
>
> Yes during ping, packets are dropped. It gives like the one below
>
> [root@dbbld u02]# ping dbbld.domain.com
> PING appsbld.pharmatrade.pharmatrade.com (132.1.1.126) 56(84) bytes of
> data.
> 64 bytes from dbbld.domain.com (132.1.1.126): icmp_seq=2 ttl=64
> time=0.122
> ms
> 64 bytes from dbbld.domain.com (132.1.1.126): icmp_seq=3 ttl=64
> time=0.090
> ms
> 64 bytes from dbbld.domain.com (132.1.1.126): icmp_seq=4 ttl=64
> time=0.099
> ms
> 64 bytes from dbbld.domain.com (132.1.1.126): icmp_seq=5 ttl=64
> time=0.091
> ms
> 64 bytes from dbbld.domain.com (132.1.1.126): icmp_seq=6 ttl=64
> time=0.095
> ms
>
> --- dbbld.domain.com ping statistics ---
> 6 packets transmitted, 5 received, 16% packet loss, time 5000ms
> rtt min/avg/max/mdev = 0.090/0.099/0.122/0.014 ms
>
> I have all host entries in place and servers registered in DNS
>
> Here is the output of "sar -q"
>
> [root@dbbld u02]# sar -q
> Linux 2.6.18-53.el5PAE (dbbld)  05/03/2009
>
> 09:50:01 AM   runq-sz  plist-sz   ldavg-1   ldavg-5  ldavg-15
> 10:00:01 AM         0       189      0.12      0.08      0.06
> 10:10:01 AM         0       185      0.01      0.04      0.04
> 10:20:01 AM         0       183      0.09      0.05      0.02
> 10:30:01 AM         0       183      0.04      0.05      0.00
> 10:40:01 AM         0       185      0.05      0.06      0.00
> Average:            0       185      0.06      0.06      0.02
>
> 10:46:40 AM       LINUX RESTART
>
> 10:54:21 AM       LINUX RESTART
>
> 11:00:01 AM   runq-sz  plist-sz   ldavg-1   ldavg-5  ldavg-15
> 11:10:01 AM         0       173      0.03      0.12      0.21
> Average:            0       173      0.03      0.12      0.21
>
> 11:22:15 AM       LINUX RESTART
>
> 11:38:03 AM       LINUX RESTART
>
> 11:40:01 AM   runq-sz  plist-sz   ldavg-1   ldavg-5  ldavg-15
> 11:50:01 AM         0       189      0.61      0.72      0.53
> Average:            0       189      0.61      0.72      0.53
>
> 11:59:06 AM       LINUX RESTART
>
> 12:00:02 PM   runq-sz  plist-sz   ldavg-1   ldavg-5  ldavg-15
> 12:10:01 PM         0       189      0.24      1.20      0.96
> 12:20:01 PM         0       188      0.09      0.22      0.52
> 12:30:01 PM         0       188      0.04      0.06      0.28
> 12:40:01 PM         0       195      3.19      1.54      0.83
> 12:50:01 PM         0       191      2.69      1.37      0.96
> 01:00:02 PM         0       192      0.15      0.73      0.82
> Average:            0       190      1.07      0.85      0.73
>
> 01:04:33 PM       LINUX RESTART
>
> 01:10:01 PM   runq-sz  plist-sz   ldavg-1   ldavg-5  ldavg-15
> 01:20:01 PM         0       186      2.66      2.47      1.67
> 01:30:01 PM         0       176      2.58      2.64      2.12
> Average:            0       181      2.62      2.56      1.90
>
> 01:55:25 PM       LINUX RESTART
>
> 02:00:01 PM   runq-sz  plist-sz   ldavg-1   ldavg-5  ldavg-15
> 02:10:01 PM         0       172      1.84      1.75      1.16
> 02:20:01 PM         0       171      1.84      1.84      1.47
> Average:            0       172      1.84      1.79      1.31
>
>
> Ram
>
> On Sun, May 3, 2009 at 2:18 PM, Geofrey Rainey
> <Geofrey.Rainey@xxxxxxxxxx>wrote:
>
> > That logical volume for swap is pretty weird, no point in having
that
> > there I think, but not to worry for the moment, I don't think it
would
> > cause issues like you're experiencing.
> >
> > What's the output of "sar -q".
> >
> > Also, if you ping the server any other time does it always drop
> packets?
> >
> > -----Original Message-----
> > From: redhat-list-bounces@xxxxxxxxxx
> > [mailto:redhat-list-bounces@xxxxxxxxxx] On Behalf Of Ramakrishnan
> > Seshadhri
> > Sent: Sunday, 3 May 2009 10:13 p.m.
> > To: General Red Hat Linux discussion list
> > Subject: Re: Reg : RHEL 5.0 Installatio
> >
> > Here is the output for swapon -s
> >
> > [root@dbbld ~]# swapon -s
> > Filename                                Type            Size    Used
> > Priority
> > /dev/mapper/VolGroup00-LogVol01         partition       950264  0
> > -1
> > /dev/sda5                               partition       9438148 0
> > -2
> >
> >
> > Ram
> >
> > On Sun, May 3, 2009 at 2:10 PM, Geofrey Rainey
> > <Geofrey.Rainey@xxxxxxxxxx>wrote:
> >
> > > I wouldn't worry about that zombie. What about my earlier question
> > about
> > > The output of swapon -s?
> > >
> > >
> > > -----Original Message-----
> > > From: redhat-list-bounces@xxxxxxxxxx
> > > [mailto:redhat-list-bounces@xxxxxxxxxx] On Behalf Of Ramakrishnan
> > > Seshadhri
> > > Sent: Sunday, 3 May 2009 10:03 p.m.
> > > To: General Red Hat Linux discussion list
> > > Subject: Re: Reg : RHEL 5.0 Installatio
> > >
> > > Hi,
> > >
> > >
> > > I can see that there is a Zonbie
> > >
> > > [root@dbbld etc]# ps -ef | grep ifup-eth
> > > root     14335  3476  1 14:02 ?        00:00:00 [ifup-eth]
<defunct>
> > > root     14362  6988  0 14:02 pts/2    00:00:00 grep ifup-eth
> > >
> > > what is this process. I am not able to kill this.
> > >
> > >
> > > Ram.S
> > >
> > > On Sun, May 3, 2009 at 1:59 PM, Ramakrishnan Seshadhri <
> > > ramakrishnan42@xxxxxxxxx> wrote:
> > >
> > > > Hi
> > > >
> > > > Here is the ifconfig report below
> > > >
> > > > [root@dbbld ~]# ifconfig
> > > > bond0     Link encap:Ethernet  HWaddr 00:21:5E:2D:90:5E
> > > >           inet addr:132.1.1.125  Bcast:132.1.255.255
> > Mask:255.255.0.0
> > > >           inet6 addr: fe80::221:5eff:fe2d:905e/64 Scope:Link
> > > >           UP BROADCAST RUNNING MASTER MULTICAST  MTU:1500
> Metric:1
> > > >           RX packets:1150 errors:0 dropped:0 overruns:0 frame:0
> > > >           TX packets:961 errors:0 dropped:0 overruns:0 carrier:0
> > > >           collisions:0 txqueuelen:0
> > > >           RX bytes:93435 (91.2 KiB)  TX bytes:87481 (85.4 KiB)
> > > >
> > > > eth0      Link encap:Ethernet  HWaddr 00:21:5E:2D:90:5E
> > > >           inet6 addr: fe80::221:5eff:fe2d:905e/64 Scope:Link
> > > >           UP BROADCAST RUNNING SLAVE MULTICAST  MTU:1500
Metric:1
> > > >           RX packets:1150 errors:0 dropped:0 overruns:0 frame:0
> > > >           TX packets:961 errors:0 dropped:0 overruns:0 carrier:0
> > > >           collisions:0 txqueuelen:1000
> > > >           RX bytes:93435 (91.2 KiB)  TX bytes:87481 (85.4 KiB)
> > > >           Interrupt:114 Memory:da000000-da012100
> > > >
> > > > eth1      Link encap:Ethernet  HWaddr 00:21:5E:2D:90:60
> > > >           UP BROADCAST RUNNING SLAVE MULTICAST  MTU:1500
Metric:1
> > > >           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> > > >           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> > > >           collisions:0 txqueuelen:1000
> > > >           RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
> > > >           Interrupt:82 Memory:d8000000-d8012100
> > > >
> > > > lo        Link encap:Local Loopback
> > > >           inet addr:127.0.0.1  Mask:255.0.0.0
> > > >           inet6 addr: ::1/128 Scope:Host
> > > >           UP LOOPBACK RUNNING  MTU:16436  Metric:1
> > > >           RX packets:2776 errors:0 dropped:0 overruns:0 frame:0
> > > >           TX packets:2776 errors:0 dropped:0 overruns:0
carrier:0
> > > >           collisions:0 txqueuelen:0
> > > >           RX bytes:3321472 (3.1 MiB)  TX bytes:3321472 (3.1 MiB)
> > > >
> > > > the collision  field is zero. But the TX is bytes:87481. There
are
> > Two
> > > NIC
> > > > configured to the Virtual IP bond0. Is there a problem there.
> > > > Is there a log while where I could check the errors.
> > > >
> > > > Ram
> > > >
> > > >
> > > > On Sun, May 3, 2009 at 1:41 PM, Geofrey Rainey
> > > <Geofrey.Rainey@xxxxxxxxxx>wrote:
> > > >
> > > >> 1. look in the output of ifconfig and you'll see a "collisions"
> > field
> > > >> which should have a value of 0.
> > > >>
> > > >> 2. look at the output of either "ethtool <interface>", or
> mii-tool
> > > >> <interface>, and you will see what the port speed is. This must
> > match
> > > >> the port speed of your switch (your network guys will tell you
if
> > the
> > > >> switch is
> > > >> 100Mb or 1000Mb etc).
> > > >>
> > > >> Look for output like this which says the interface is running
at
> > > >> 100Mb/s. This is bad if you're connected to a 1000Mb switch.
> > > >>
> > > >> Advertised auto-negotiation: Yes
> > > >> Speed: 100Mb/s
> > > >> Duplex: Full
> > > >>
> > > >> -----Original Message-----
> > > >> From: redhat-list-bounces@xxxxxxxxxx
> > > >> [mailto:redhat-list-bounces@xxxxxxxxxx] On Behalf Of
Ramakrishnan
> > > >> Seshadhri
> > > >> Sent: Sunday, 3 May 2009 9:30 p.m.
> > > >> To: General Red Hat Linux discussion list
> > > >> Subject: Re: Reg : RHEL 5.0 Installatio
> > > >>
> > > >> can you please brief how to check that.
> > > >>
> > > >> Ram.
> > > >>
> > > >> On Sun, May 3, 2009 at 1:21 PM, Geofrey Rainey
> > > >> <Geofrey.Rainey@xxxxxxxxxx>wrote:
> > > >>
> > > >> > Look in "ifconfig", are there any collisions on the
interface?
> > > >> >
> > > >> > Also, perhaps the switch hasn't properly negotiated the speed
> > with
> > > >> > Your interface?
> > > >> >
> > > >> > -----Original Message-----
> > > >> > From: redhat-list-bounces@xxxxxxxxxx
> > > >> > [mailto:redhat-list-bounces@xxxxxxxxxx] On Behalf Of
> Ramakrishnan
> > > >> > Seshadhri
> > > >> > Sent: Sunday, 3 May 2009 9:18 p.m.
> > > >> > To: General Red Hat Linux discussion list
> > > >> > Subject: Re: Reg : RHEL 5.0 Installatio
> > > >> >
> > > >> > Actually the problem is here. Once I reboot the server the
load
> > is
> > > >> > around
> > > >> > 2.8 and I am not able to ping the server (All firewalls are
> > turned
> > > >> off).
> > > >> > After sometime I am able to telnet or ping the server. While
> > > pinging
> > > >> it
> > > >> > drops 50% of packets.
> > > >> > both telnet and ssh services are enabled.
> > > >> >
> > > >> >
> > > >> > Ram
> > > >> >
> > > >> > On Sun, May 3, 2009 at 1:06 PM, Geofrey Rainey
> > > >> > <Geofrey.Rainey@xxxxxxxxxx>wrote:
> > > >> >
> > > >> > > Also, what about the outut of the "sar" command without any
> > > >> arguments?
> > > >> > >
> > > >> > > -----Original Message-----
> > > >> > > From: redhat-list-bounces@xxxxxxxxxx
> > > >> > > [mailto:redhat-list-bounces@xxxxxxxxxx] On Behalf Of
> > Ramakrishnan
> > > >> > > Seshadhri
> > > >> > > Sent: Sunday, 3 May 2009 9:01 p.m.
> > > >> > > To: General Red Hat Linux discussion list
> > > >> > > Subject: Re: Reg : RHEL 5.0 Installatio
> > > >> > >
> > > >> > > Hi,
> > > >> > >
> > > >> > >
> > > >> > > Thanks for the response : Here is my output of "sar -r"
> command
> > > >> > >
> > > >> > > Linux 2.6.18-53.el5PAE (dbbld)  05/03/2009
> > > >> > >
> > > >> > > 09:50:01 AM kbmemfree kbmemused  %memused kbbuffers
kbcached
> > > >> > kbswpfree
> > > >> > > kbswpused  %swpused  kbswpcad
> > > >> > > 10:00:01 AM   7400868    910644     10.96    141164
590936
> > > >> > > 10388412         0      0.00         0
> > > >> > > 10:10:01 AM   7394136    917376     11.04    142056
597464
> > > >> > > 10388412         0      0.00         0
> > > >> > > 10:20:01 AM   7394756    916756     11.03    142260
597464
> > > >> > > 10388412         0      0.00         0
> > > >> > > 10:30:01 AM   7394632    916880     11.03    142420
597468
> > > >> > > 10388412         0      0.00         0
> > > >> > > 10:40:01 AM   7394012    917500     11.04    142668
597488
> > > >> > > 10388412         0      0.00         0
> > > >> > > Average:      7395681    915831     11.02    142114
596164
> > > >> > > 10388412         0      0.00         0
> > > >> > >
> > > >> > > 10:46:40 AM       LINUX RESTART
> > > >> > >
> > > >> > > 10:54:21 AM       LINUX RESTART
> > > >> > >
> > > >> > > 11:00:01 AM kbmemfree kbmemused  %memused kbbuffers
kbcached
> > > >> > kbswpfree
> > > >> > > kbswpused  %swpused  kbswpcad
> > > >> > > 11:10:01 AM   7781624    529888      6.38     97864
300800
> > > >> > > 10388412         0      0.00         0
> > > >> > > Average:      7781624    529888      6.38     97864
300800
> > > >> > > 10388412         0      0.00         0
> > > >> > >
> > > >> > > 11:22:15 AM       LINUX RESTART
> > > >> > >
> > > >> > > 11:38:03 AM       LINUX RESTART
> > > >> > >
> > > >> > > 11:40:01 AM kbmemfree kbmemused  %memused kbbuffers
kbcached
> > > >> > kbswpfree
> > > >> > > kbswpused  %swpused  kbswpcad
> > > >> > > 11:50:01 AM   7780860    530652      6.38     89332
301896
> > > >> > > 10388412         0      0.00         0
> > > >> > > Average:      7780860    530652      6.38     89332
301896
> > > >> > > 10388412         0      0.00         0
> > > >> > >
> > > >> > > 11:59:06 AM       LINUX RESTART
> > > >> > >
> > > >> > > 12:00:02 PM kbmemfree kbmemused  %memused kbbuffers
kbcached
> > > >> > kbswpfree
> > > >> > > kbswpused  %swpused  kbswpcad
> > > >> > > 12:10:01 PM   7728928    582584      7.01    135368
303512
> > > >> > > 10388412         0      0.00         0
> > > >> > > 12:20:01 PM   7729052    582460      7.01    135484
303516
> > > >> > > 10388412         0      0.00         0
> > > >> > > 12:30:01 PM   7728692    582820      7.01    135904
303884
> > > >> > > 10388412         0      0.00         0
> > > >> > > 12:40:01 PM    286120   8025392     96.56    121840
7634772
> > > >> > > 10388412         0      0.00         0
> > > >> > > 12:50:01 PM    289640   8021872     96.52     50696
7736596
> > > >> > > 10388408         4      0.00         4
> > > >> > > Average:      4752486   3559026     42.82    115858
3256456
> > > >> > > 10388411         1      0.00         1
> > > >> > >
> > > >> > >
> > > >> > > I cant see any swap usage.
> > > >> > >
> > > >> > > Ram
> > > >> > >
> > > >> > > On Sun, May 3, 2009 at 12:57 PM, Geofrey Rainey
> > > >> > > <Geofrey.Rainey@xxxxxxxxxx>wrote:
> > > >> > >
> > > >> > > > Try the following:
> > > >> > > >
> > > >> > > > # sar -r (look at how much swap is being used)
> > > >> > > >
> > > >> > > > # sar (is the i/o wait column high?)
> > > >> > > >
> > > >> > > >
> > > >> > > > -----Original Message-----
> > > >> > > > From: redhat-list-bounces@xxxxxxxxxx
> > > >> > > > [mailto:redhat-list-bounces@xxxxxxxxxx] On Behalf Of
> > > Ramakrishnan
> > > >> > > > Seshadhri
> > > >> > > > Sent: Sunday, 3 May 2009 7:41 p.m.
> > > >> > > > To: General Red Hat Linux discussion list
> > > >> > > > Subject: Reg : RHEL 5.0 Installatio
> > > >> > > >
> > > >> > > > Hi,
> > > >> > > >
> > > >> > > > I have installed RHEL 5  on one of the servers and once
the
> > > server
> > > >> > > boots
> > > >> > > > up
> > > >> > > > the load average is constantly at 2.8 and server is slow.
> > > >> > > >
> > > >> > > > Server is IBM blade by make .
> > > >> > > >
> > > >> > > > 8 GB RAM
> > > >> > > >
> > > >> > > >
> > > >> > > > top command does not show any CPR intensive tasks.
> > > >> > > >
> > > >> > > > please let me know how to find out what is occupying CPU
> > > >> > > >
> > > >> > > >
> > > >> > > > Ram
> > > >> > > > --
> > > >> > > > redhat-list mailing list
> > > >> > > > unsubscribe
> > > >> > mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
> > > >> > > > https://www.redhat.com/mailman/listinfo/redhat-list
> > > >> > > >
==========================================================
> > > >> > > > For more information on the Television New Zealand Group,
> > visit
> > > us
> > > >> > > > online at tvnz.co.nz
> > > >> > > >
==========================================================
> > > >> > > > CAUTION:  This e-mail and any attachment(s) contain
> > information
> > > >> that
> > > >> > > > is intended to be read only by the named recipient(s).
> This
> > > >> > > information
> > > >> > > > is not to be used or stored by any other person and/or
> > > >> organisation.
> > > >> > > >
> > > >> > > >
> > > >> > > > --
> > > >> > > > redhat-list mailing list
> > > >> > > > unsubscribe
> > > >> > mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
> > > >> > > > https://www.redhat.com/mailman/listinfo/redhat-list
> > > >> > > >
> > > >> > > --
> > > >> > > redhat-list mailing list
> > > >> > > unsubscribe
> > > >> mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
> > > >> > > https://www.redhat.com/mailman/listinfo/redhat-list
> > > >> > > ==========================================================
> > > >> > > For more information on the Television New Zealand Group,
> visit
> > > us
> > > >> > > online at tvnz.co.nz
> > > >> > > ==========================================================
> > > >> > > CAUTION:  This e-mail and any attachment(s) contain
> information
> > > that
> > > >> > > is intended to be read only by the named recipient(s).
This
> > > >> > information
> > > >> > > is not to be used or stored by any other person and/or
> > > organisation.
> > > >> > >
> > > >> > >
> > > >> > > --
> > > >> > > redhat-list mailing list
> > > >> > > unsubscribe
> > > >> mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
> > > >> > > https://www.redhat.com/mailman/listinfo/redhat-list
> > > >> > >
> > > >> > --
> > > >> > redhat-list mailing list
> > > >> > unsubscribe
> > > mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
> > > >> > https://www.redhat.com/mailman/listinfo/redhat-list
> > > >> > ==================================================
> > > >> > ========
> > > >> > For more information on the Television New Zealand Group,
visit
> > us
> > > >> > online at tvnz.co.nz
> > > >> > ==========================================================
> > > >> > CAUTION:  This e-mail and any attachment(s) contain
information
> > > that
> > > >> > is intended to be read only by the named recipient(s).  This
> > > >> information
> > > >> > is not to be used or stored by any other person and/or
> > > organisation.
> > > >> >
> > > >> >
> > > >> > --
> > > >> > redhat-list mailing list
> > > >> > unsubscribe
> > > mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
> > > >> > https://www.redhat.com/mailman/listinfo/redhat-list
> > > >> >
> > > >> --
> > > >> redhat-list mailing list
> > > >> unsubscribe
> > mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
> > > >> https://www.redhat.com/mailman/listinfo/redhat-list
> > > >> ==========================================================
> > > >> For more information on the Television New Zealand Group, visit
> us
> > > >> online at tvnz.co.nz
> > > >> ==========================================================
> > > >> CAUTION:  This e-mail and any attachment(s) contain information
> > that
> > > >> is intended to be read only by the named recipient(s).  This
> > > information
> > > >> is not to be used or stored by any other person and/or
> > organisation.
> > > >>
> > > >>
> > > >> --
> > > >> redhat-list mailing list
> > > >> unsubscribe
> > mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
> > > >> https://www.redhat.com/mailman/listinfo/redhat-list
> > > >>
> > > >
> > > >
> > > --
> > > redhat-list mailing list
> > > unsubscribe
> mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
> > > https://www.redhat.com/mailman/listinfo/redhat-list
> > > ==========================================================
> > > For more information on the Television New Zealand Group, visit us
> > > online at tvnz.co.nz
> > > ==========================================================
> > > CAUTION:  This e-mail and any attachment(s) contain information
that
> > > is intended to be read only by the named recipient(s).  This
> > information
> > > is not to be used or stored by any other person and/or
organisation.
> > >
> > >
> > > --
> > > redhat-list mailing list
> > > unsubscribe
> mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
> > > https://www.redhat.com/mailman/listinfo/redhat-list
> > >
> > --
> > redhat-list mailing list
> > unsubscribe
mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
> > https://www.redhat.com/mailman/listinfo/redhat-list
> > ==========================================================
> > For more information on the Television New Zealand Group, visit us
> > online at tvnz.co.nz
> > ==========================================================
> > CAUTION:  This e-mail and any attachment(s) contain information that
> > is intended to be read only by the named recipient(s).  This
> information
> > is not to be used or stored by any other person and/or organisation.
> >
> >
> > --
> > redhat-list mailing list
> > unsubscribe
mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
> > https://www.redhat.com/mailman/listinfo/redhat-list
> >
> --
> redhat-list mailing list
> unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/redhat-list
> ==========================================================
> For more information on the Television New Zealand Group, visit us
> online at tvnz.co.nz
> ==========================================================
> CAUTION:  This e-mail and any attachment(s) contain information that
> is intended to be read only by the named recipient(s).  This
information
> is not to be used or stored by any other person and/or organisation.
>
>
> --
> redhat-list mailing list
> unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/redhat-list
>
-- 
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
==========================================================
For more information on the Television New Zealand Group, visit us
online at tvnz.co.nz 
==========================================================
CAUTION:  This e-mail and any attachment(s) contain information that
is intended to be read only by the named recipient(s).  This information
is not to be used or stored by any other person and/or organisation.


-- 
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list

[Index of Archives]     [CentOS]     [Kernel Development]     [PAM]     [Fedora Users]     [Red Hat Development]     [Big List of Linux Books]     [Linux Admin]     [Gimp]     [Asterisk PBX]     [Yosemite News]     [Red Hat Crash Utility]


  Powered by Linux