Hey there, I'm trying to setup the virtual serial port under a compaq DL380G5 server in order to bind a getty to it and allow serial port logins via the iLOM, however, after having enabled this as COM2 under the BIOS options and turned on the EMS console as per the instructions at http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00263709/c00263709.pdf (iLOM serial port configuration guide) I am getting the 'getty respawned too fast' message as it tries to bind to the serial port. When trying to query this port with setserial I get.. # setserial /dev/ttyS1 /dev/ttyS1: No such device or address /dev/ttyS1 is as follows.. # ls -l /dev/ttyS1 crw------- 1 root root 4, 65 Apr 27 2009 /dev/ttyS1 The inittab line I've used is.. S1:2345:respawn:/sbin/agetty 9600 ttyS1 vt100 Has anyone here managed to set this up on a DL380G5 HP Proliant server before ? -- Steve. -- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list
