aix tiger wrote: > Guys > > I am currently configuring RHEL cluster and as this is my first time > to configure RHEL cluster so i am facing few problems: I need you > guys input an help. > > 1. My first question is about fencing, I have configured HP ILO for > both of the cluster nodes. But while configuraing these fence devices > for nodes in cluster configuration tool , i am confused. Should i > place both fence devices(comil01 & comilo2) in same fence level and > assign this fence level to both cluster nodes.OR i should create two > fence levels ( each with one fence device ) and then assign these > levels to each node. > > 2. How i can create a ethernet based heartbeat channel between the > cluster nodes. I have two nodes comm1 with ip address of 172.16.2.182 > and comm2 with ip address of 172.16.2.183.Should i place a cross > cable between the other interface available on the nodes and put ip > like 192.168.10.1 & 192.168.10.2 on them . Then how can tell my > cluster to use this ethernet link as heartbeat between the nodes? > > Please advice as i am a newbie for this sort of cluster configuration > on RHEL > > Best Regards > > Polani 1. Each node needs at least one fencing device. And each device needs to nest in at least one level. So - Each node needs one level and one fencing device. 2. http://kbase.redhat.com/faq/FAQ_51_7109.shtm Cheers -- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list
