please make sure that you are using a 4 pair fully connected cat5 cable,
a 2pair connected cat5 cable will connect 100megabit but not gigabit.
Matthijs
Stephane Branchoux
<stephane.branchoux@un To: redhat-list@xxxxxxxxxx
iv-perp.fr> cc:
Sent by: Subject: Gigabit ethernet
redhat-list-bounces@re
dhat.com
27-07-2006 09:47
Please respond to
stephane.branchoux;
Please respond to
General Red Hat Linux
discussion list
Hello,
I use 2.6.9-34.0.2.ELsmp kernel on a Red Hat Enterprise Linux AS
release 4 box.
# lspci |grep -i ethernet
02:01.0 Ethernet controller: Intel Corporation 82546GB Gigabit Ethernet
Controller (rev 03)
Eth1 card is connected on a 2950 cisco switch (on a giga port RJ45,
speed 1000 and duplex full ).
When i use :
ethtool -s eth1 speed 1000 duplex full autoneg off, then mii-tool -v
gives me :
eth1: negotiated, link ok
product info: vendor 00:50:43, model 2 rev 5
basic mode: autonegotiation enabled
basic status: autonegotiation complete, link ok
capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
How to activate 1000baseTx-FD ?
Many thanks in advance.
--
stephane BRANCHOUX
Centre de Ressources Informatiques de l'Université de Perpignan.
Systèmes/Réseaux
mailto:stephane.branchoux@xxxxxxxxxxxx
04 68 66 21 24
Validation signature / Trusting signature: http://igc.cru.fr/trust.html
--
Ce message a ete verifie par MailScanner
pour des virus ou des polluriels et rien de
suspect n'a ete trouve.
CRI Université de Perpignan
--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
**********************************************************************
This transmission is confidential and must not be used or disclosed by
anyone other than the intended recipient. Neither Corus Group Plc nor
any of its subsidiaries can accept any responsibility for any use or
misuse of the transmission by anyone.
**********************************************************************
--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
