Hello,
I use 2.6.9-34.0.2.ELsmp kernel on a Red Hat Enterprise Linux AS
release 4 box.
# lspci |grep -i ethernet
02:01.0 Ethernet controller: Intel Corporation 82546GB Gigabit Ethernet
Controller (rev 03)
Eth1 card is connected on a 2950 cisco switch (on a giga port RJ45,
speed 1000 and duplex full ).
When i use :
ethtool -s eth1 speed 1000 duplex full autoneg off, then mii-tool -v
gives me :
eth1: negotiated, link ok
product info: vendor 00:50:43, model 2 rev 5
basic mode: autonegotiation enabled
basic status: autonegotiation complete, link ok
capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
How to activate 1000baseTx-FD ?
Many thanks in advance.
--
stephane BRANCHOUX
Centre de Ressources Informatiques de l'Université de Perpignan.
Systèmes/Réseaux
mailto:stephane.branchoux@xxxxxxxxxxxx
04 68 66 21 24
Validation signature / Trusting signature: http://igc.cru.fr/trust.html
--
Ce message a ete verifie par MailScanner
pour des virus ou des polluriels et rien de
suspect n'a ete trouve.
CRI Université de Perpignan
--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
