Hello, I have a serious problem which I'm hoping someone can help me resolve ASAP. I am running RedHat ES 4 on a HP Proliant DL 380 Server which has two NICs installed. I am booting redhat at runlevel 3. When i do an ifconfig i only get the local Loopback listed and not eth0 or eth1. When i startx and go into the RedHat Hardware browser It lists the two nics but when I go to the Network Device Control it doesn't show any network interfaces configured. Please help! ....It lists the two nics... This means that the nics have been found and are not setup yet. run kudzu to see if it finds it and sets up your modprobe.conf file it should add an entry for eth0 and eth1 - check your /etc/modprobe.conf file - also check the output of lsmod | grep eth when the module loads for the nics, use system-config-network to configure. -- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list
