On Fri, Mar 10, 2006 at 04:45:37PM -0800, Harjinder Singh wrote:
> I have a serious problem which I'm hoping someone can help me resolve
> ASAP.
>
> I am running RedHat ES 4 on a HP Proliant DL 380 Server which has two
> NICs installed.
For RHEL 4, you should use the nahant list, not redhat-list.
> I am booting redhat at runlevel 3. When i do an ifconfig i only get
> the local Loopback listed and not eth0 or eth1. When i startx and go
> into the RedHat Hardware browser It lists the two nics but when I go
> to the Network Device Control it doesn't show any network interfaces
> configured.
First off, does lspci show you the 2 onboard NICs? You should see a
pair of Broadcom GigE NICs - at least my DL380 systems do with RHEL 3.
lspci is probably what the hardware browser uses.
>From the command line, run system-config-network and configure your
network interfaces. There's a good chance they just haven't been
configured yet.
.../Ed
--
Ed Wilts, RHCE
Mounds View, MN, USA
mailto:ewilts@xxxxxxxxxx
Member #1, Red Hat Community Ambassador Program
--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
