Dag Wieers wrote:
On Fri, 10 Mar 2006, Herta Van den Eynde wrote:
I'm trying to install Red Hat Advanced Server AS 4 on a HP Proliant DL380G4.
Unlike e.g. the DL360, the DL380 does not have the option to set the OS in the
BIOS.
As soon as the installation starts, i.e. even before you get to the point
where you can enter "boot" and whatever boot options you want to use, the
server switches to graphics mode, meaning I cannot access it from basic iLO.
Is there a way to overcome this?
Red Hat is using the 'display' directive in the syslinux config-file
(isolinux/isolinux.cfg) and provides a splash screen that enables graphics
mode (when this is supported).
See also: http://syslinux.zytor.com/faq.php
I see no other option to disable this splash-screen, other than somehow
let the BIOS advertise only text-mode is supported.
If this is not possible, you might want to investigate into PXE
booting, or providing your own (custom) ISO image or floppy image without
this splash-screen.
I think it is a valid question to raise why text-mode is not the default,
as we have the same problem :) (and most remote consoles either are
text-based or require a stupid and slow java-interface)
I included the syslinux mailinglist to confirm there is no other way to
disable the graphical boot, other than changing the syslinux config.
There is, actually; if you press Ctrl-X then syslinux/pxelinux/isolinux
will drop out of graphics mode and go to text mode. This assumes basic
iLO won't squelsh the keyboard in graphics mode, which it very well
might; the whole basic vs advanced iLO is such a completely stupid
arrangement.
However, if it doesn't, you can let the screen go dead, wait a few
seconds, and press Ctrl-X. That should bring the machine back to text mode.
-hpa
--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
