----- Original Message ----- From: Ed Wilts <ewilts@xxxxxxxxxx> Date: Thursday, February 24, 2005 8:09 pm Subject: Re: Problem with installation of Qlogic 2310F FC card!!! > On Wed, Feb 23, 2005 at 11:49:13PM -0800, Govind C wrote: > > well i did do a kernel upgrade still the FC is not being > recognized by > > the system.When i do a > > > > [root@Render-master lib]# insmod ./modules/2.4.21- > > 27.0.2.ELsmp/kernel/drivers/addon/qla2200/qla2200.o > > ./modules/2.4.21- > 27.0.2.ELsmp/kernel/drivers/addon/qla2200/qla2200.o: > > init_module: No such device > > Hint: insmod errors can be caused by incorrect module > parameters, > > including invalid IO or IRQ parameters. > > You may find more information in syslog or the output from > dmesg > What's /etc/modules.conf look like? Here's the snippet from mine: > > alias scsi_hostadapter cciss > post-remove qla2300 rmmod qla2300_conf > alias scsi_hostadapter1 qla2300 > alias scsi_hostadapter2 qla2300_conf > alias scsi_hostadapter3 qla2300 > alias scsi_hostadapter4 qla2300_conf > alias scsi_hostadapter5 sg > options qla2300 ql2xmaxqdepth=16 qlport_down_retry=16 > qlogin_retry_count=16 ql2xfailover=1 > Well My /etc/modules.conf doesn`t contain any of those lines.Do we need to add them manually always.One question, why didn`t linux find the FC at the time of installation. Cheers -- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list
