RE: cron.weekly error?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Does this constitute an error or is this more or less expected?
"/etc/cron.weekly/makewhatis.cron:

zcat: ./cancel.1.gz: No such file or directory"

-----Original Message-----
From: redhat-list-bounces@xxxxxxxxxx
[mailto:redhat-list-bounces@xxxxxxxxxx] On Behalf Of
redhat-list-request@xxxxxxxxxx
Sent: Sunday, November 28, 2004 12:00 PM
To: redhat-list@xxxxxxxxxx
Subject: redhat-list Digest, Vol 9, Issue 30

Send redhat-list mailing list submissions to
	redhat-list@xxxxxxxxxx

To subscribe or unsubscribe via the World Wide Web, visit
	https://www.redhat.com/mailman/listinfo/redhat-list
or, via email, send a message with subject or body 'help' to
	redhat-list-request@xxxxxxxxxx

You can reach the person managing the list at
	redhat-list-owner@xxxxxxxxxx

When replying, please edit your Subject line so it is more specific
than "Re: Contents of redhat-list digest..."


Today's Topics:

   1. Re: redhat-list Digest, Vol 9, Issue 28 (Aimin Yan)
   2. how to set up wireless network connection in Fedro 2 (Aimin Yan)
   3. Re: how to set up wireless network connection in Fedro 2
      (Willy Wittesaele)
   4. Re:Perl script problem (Padiyath Sreekumaran)
   5. Re: Perl script problem (Ed Greshko)
   6. RH 9 install crashes (mark)
   7. Re: RH 9 install crashes (Ed Wilts)
   8. auto restart on cpu usage (Rushan Sobar)
   9. Linux Memory Management (Asim Ansari)
  10. FOS (Rushan Sobar)
  11. Re: FOS (Ed Wilts)
  12. Re: Format Output of bash into columns (Mike Vanecek)
  13. Re: Format Output of bash into columns (Mike Vanecek)
  14. Re: Format Output of bash into columns (Mike Vanecek)


----------------------------------------------------------------------

Message: 1
Date: Sat, 27 Nov 2004 11:17:24 -0600
From: Aimin Yan <aiminy@xxxxxxxxxxx>
Subject: Re: redhat-list Digest, Vol 9, Issue 28
To: redhat-list@xxxxxxxxxx
Cc: Edward <edward@xxxxxxxxxxxxxxxxxxxx>
Message-ID:
	<6.0.1.1.2.20041127110835.033a12d0@xxxxxxxxxxxxxxxxxxxxxxx>
Content-Type: text/plain; charset="us-ascii"; format=flowed

I run lspci
I get the following:
then how to do next?

Aimin

00:00.0 Host bridge: Intel Corp. 82852/855GM Host Bridge (rev 02)
00:00.1 System peripheral: Intel Corp. 855GM/GME GMCH Memory I/O Control

Registers (rev 02)
00:00.3 System peripheral: Intel Corp. 855GM/GME GMCH Configuration
Process 
Registers (rev 02)
00:02.0 VGA compatible controller: Intel Corp. 82852/855GM Integrated 
Graphics Device (rev 02)
00:02.1 Display controller: Intel Corp. 82852/855GM Integrated Graphics 
Device (rev 02)
00:1d.0 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #1 (rev 03)
00:1d.1 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #2 (rev 03)
00:1d.2 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #3 (rev 03)
00:1d.7 USB Controller: Intel Corp. 82801DB (ICH4) USB2 EHCI Controller 
(rev 03)
00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 83)
00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller (rev
03)
00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4) Ultra ATA Storage 
Controller (rev 03)
00:1f.3 SMBus: Intel Corp. 82801DB/DBM (ICH4) SMBus Controller (rev 03)
00:1f.5 Multimedia audio controller: Intel Corp. 82801DB (ICH4) AC'97
Audio 
Controller (rev 03)
00:1f.6 Modem: Intel Corp. 82801DB (ICH4) AC'97 Modem Controller (rev
03)
02:01.0 Network controller: Intel Corp. PRO/Wireless LAN 2100 3B Mini
PCI 
Adapter (rev 04)
02:04.0 CardBus bridge: Texas Instruments PCI7420 CardBus Controller
02:04.1 CardBus bridge: Texas Instruments PCI7420 CardBus Controller
02:04.2 FireWire (IEEE 1394): Texas Instruments: Unknown device 802e
02:04.3 Unknown mass storage controller: Texas Instruments PCI7420 Flash

Media Controller
02:05.0 Ethernet controller: Broadcom Corporation BCM5705M
10/100/1000Base 
T (rev 02)




At 11:00 2004-11-26, you wrote:
>Send redhat-list mailing list submissions to
>         redhat-list@xxxxxxxxxx
>
>To subscribe or unsubscribe via the World Wide Web, visit
>         https://www.redhat.com/mailman/listinfo/redhat-list
>or, via email, send a message with subject or body 'help' to
>         redhat-list-request@xxxxxxxxxx
>
>You can reach the person managing the list at
>         redhat-list-owner@xxxxxxxxxx
>
>When replying, please edit your Subject line so it is more specific
>than "Re: Contents of redhat-list digest..."
>
>
>Today's Topics:
>
>    1. Checkpoint Firewall-1 NG FP2 (Brian McGrew)
>    2. firewall survey (Dana Holland)
>    3. how to set up wireless network connection in Fedro 2 (Aimin Yan)
>    4. Re: how to set up wireless network connection in Fedro 2
(Edward)
>    5. Re: how to set up wireless network connection in Fedro 2
>       (C. Linus Hicks)
>    6. Re: firewall survey (Pete Nesbitt)
>    7. RE: Perl script Problem with Linux (Padiyath Sreekumaran)
>    8. Re: Perl script Problem with Linux (Jason Dixon)
>    9. Power down of SMP servers (McDougall, Marshall (FSH))
>   10. kernel panic HP DL 380 G3  (Amanda Galligan)
>
>
>----------------------------------------------------------------------
>
>Message: 1
>Date: Thu, 25 Nov 2004 10:14:00 -0800
>From: "Brian McGrew" <Brian@xxxxxxxxxxxxxxxxxxx>
>Subject: Checkpoint Firewall-1 NG FP2
>To: "General Red Hat Linux discussion list" <redhat-list@xxxxxxxxxx>
>Message-ID:
> 
><E936DB2FBF741340845C3DFCFAD364254758@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>
>
>Content-Type: text/plain;       charset="us-ascii"
>
>Good day all,
>
>I'm wondering if anyone has any experience running Checkpoint
Firewall-1
>NG Feature Pack 2 under RedHat 7.3 or 9.0?  If so, what hardware is
good
>and how well does it run?
>
>Thanks,
>
>-brian
>
>Brian D. McGrew {brian@xxxxxxxxxxxxxxxxxxx || pacemakertaker@xxxxxxxx }
>---
> > Failure is not an option; it is included with every Microsoft
product.
>
>
>
>------------------------------
>
>Message: 2
>Date: Thu, 25 Nov 2004 15:00:45 -0600
>From: Dana Holland <dana.work@xxxxxxxxxxxxxxxxxx>
>Subject: firewall survey
>To: General Red Hat Linux discussion list <redhat-list@xxxxxxxxxx>
>Message-ID: <41A647FD.3070409@xxxxxxxxxxxxxxxxxx>
>Content-Type: text/plain; charset=us-ascii; format=flowed
>
>Although this isn't entirely on topic for this list, I thought this
>would be an excellent group to ask...
>
>As our college prepares for reaccreditation, we're starting to evaluate
>some of our internal processes.  I'm trying to compare what we do with
>others when it comes to technology, so I've designed a little survey
>dedicated to just one decision-making process you might have to go
>through.  If you have time to answer these questions, it would be very
>much appreciated.
>
>1.  Does your institution/organization use a firewall at the enterprise
>level (institution-wide)?
>
>2.  Do you use a commercial product or a self-built product?
>
>3.  Is your firewall considered to be a hardware appliance or a
software
>solution?
>
>4.  Related to question 3, do you feel that one is better than the
>other?  Why or why not?
>
>5.  What factors are involved in your decision to choose a firewall?
>
>6.  Do you have a formal management process for evaluating a firewall?
>If so, would you be willing to share it?
>
>7.  Obviously, cost and personnel experience are major factors when
>choosing a firewall?  Are there other factors that are just as
important?
>
>Thanks in advance for your help.
>--
>************************************************************
>Dana Holland    dana.holland@xxxxxxxxxxxxxxxxxx 903-875-7355
>Navarro College    Corsicana, TX
>http://www.navarrocollege.edu/staff_pages/dana/dana.html
>************************************************************
>All opinions stated are my own, and probably don't even
>vaguely resemble those of Navarro College.  :)
>
>
>
>
>------------------------------
>
>Message: 3
>Date: Thu, 25 Nov 2004 16:09:21 -0600
>From: Aimin Yan <aiminy@xxxxxxxxxxx>
>Subject: how to set up wireless network connection in Fedro 2
>To: redhat-list@xxxxxxxxxx
>Message-ID:
>         <6.0.1.1.2.20041125160751.0417d220@xxxxxxxxxxxxxxxxxxxxxxx>
>Content-Type: text/plain; charset="us-ascii"; format=flowed
>
>hello,
>does anyone know how to set up wireless network connection in Fedro 2?
>
>thanks,
>
>Aimin Yan
>
>
>
>
>------------------------------
>
>Message: 4
>Date: Fri, 26 Nov 2004 09:15:24 +0800
>From: Edward <edward@xxxxxxxxxxxxxxxxxxxx>
>Subject: Re: how to set up wireless network connection in Fedro 2
>To: General Red Hat Linux discussion list <redhat-list@xxxxxxxxxx>
>Message-ID: <41A683AC.3070807@xxxxxxxxxxxxxxxxxxxx>
>Content-Type: text/plain; charset=us-ascii; format=flowed
>
>
>
>Aimin Yan wrote:
>
> > hello,
> > does anyone know how to set up wireless network connection in Fedro
2?
> >
> > thanks,
> >
> > Aimin Yan
>
>run lspci to find out what chipset is on your wireless card first - let
>us know, and we'll go from there.
>
>Regards,
>Ed.
>
>
>
>------------------------------
>
>Message: 5
>Date: Thu, 25 Nov 2004 17:20:34 -0500
>From: "C. Linus Hicks" <lhicks@xxxxxxxxx>
>Subject: Re: how to set up wireless network connection in Fedro 2
>To: General Red Hat Linux discussion list <redhat-list@xxxxxxxxxx>
>Message-ID: <1101421234.14749.26.camel@xxxxxxxxxxxxxx>
>Content-Type: text/plain
>
>On Thu, 2004-11-25 at 16:09 -0600, Aimin Yan wrote:
> > hello,
> > does anyone know how to set up wireless network connection in Fedro
2?
>
>What is "Fedro 2"? If you mean Fedora Core 2, you might have better
luck
>with your question on fedora-list:
>
>http://www.redhat.com/mailman/listinfo/fedora-list
>
>--
>C. Linus Hicks <lhicks@xxxxxxxxx>
>
>
>
>------------------------------
>
>Message: 6
>Date: Thu, 25 Nov 2004 19:20:09 -0800
>From: Pete Nesbitt <pete@xxxxxxxxx>
>Subject: Re: firewall survey
>To: dana.holland@xxxxxxxxxxxxxxxxxx,    General Red Hat Linux
discussion
>         list <redhat-list@xxxxxxxxxx>
>Message-ID: <200411251920.09137.pete@xxxxxxxxx>
>Content-Type: text/plain;  charset="iso-8859-1"
>
>Hi,
>see inserted replies....
>
>On November 25, 2004 01:00 pm, Dana Holland wrote:
> > Although this isn't entirely on topic for this list, I thought this
> > would be an excellent group to ask...
> >
> > As our college prepares for reaccreditation, we're starting to
evaluate
> > some of our internal processes.  I'm trying to compare what we do
with
> > others when it comes to technology, so I've designed a little survey
> > dedicated to just one decision-making process you might have to go
> > through.  If you have time to answer these questions, it would be
very
> > much appreciated.
> >
> > 1.  Does your institution/organization use a firewall at the
enterprise
> > level (institution-wide)?
>
>a) at work we use an ACL on  a cisco router with firewalls on local
servers
>b) at home (just as serious/important) I use a dedicated linux box for
a fw.
>
> >
> > 2.  Do you use a commercial product or a self-built product?
>
>The fw's used on servers at work are all IPtables (more correctly
NetFilter &
>IPtables) for Linux, and for Solaris we use ...can't remember the name
but it
>is similar OSS (non-commecial). I use home grown scripts to manage
iptables.
>
>Same for home (but pure linux:-)
>
> >
> > 3.  Is your firewall considered to be a hardware appliance or a
software
> > solution?
>
>a) at work, of course the cisco routers are hardware (running
software:)
>    -the IPtables on a server (or workstation) is a software solution.
>
>b) my home firewall is a software solution (IPtables on Linux).
Although, as
>it is a dedicated headless box with little other functionality,  it
could be
>considered an appliance.
>
> >
> > 4.  Related to question 3, do you feel that one is better than the
> > other?  Why or why not?
>
>There may be speed advantages to hardware solutions that are based on a
ASIC
>(application specific integrated circuit) as they have little overhead.
>However, using a barebones linux box you can get very good performance
and
>any loss is easily offset in the granularity and flexability of a
software
>solution. Also, from a security aspect, sometimes vendors of
proprietary
>solutions are not as forth coming as they could be when it comes to
reporting
>vulnerabilities.
>
> >
> > 5.  What factors are involved in your decision to choose a firewall?
>
>Most important is reliability and ability to maintain it. Not
necessarily 
>ease
>of maintenance but understanding the underlying process so you can
>troubleshoot and react to (planned or imposed) changes.
>
> >
> > 6.  Do you have a formal management process for evaluating a
firewall?
> > If so, would you be willing to share it?
>
>We don't have a formal process.
>
>Typically, it is the configuration that you are concerned with (plus
stable &
>fast), so any scans or penetration testing would really be checking the
rules
>(not the FW persay) unless there is a unpatched vulnerability in the
fw.
>
> >
> > 7.  Obviously, cost and personnel experience are major factors when
> > choosing a firewall?  Are there other factors that are just as
important?
>
>Experience and solid understanding of the how to write, maintain and
review
>firewall rules is extremely important. You must be able to say for sure
if
>the fw is blocking a broken service as that is the usual first suspect.
You
>need to know with certainty because you  can't be stopping the firewall
just
>to prove it isn't the problem. (fyi, i find tcpwrappers is often
overlooked
>when sorting out connectivity of a new service).
>
>I think cost should be a consideration in respect to the ability to buy
a
>firewall (or train/outsource), however, remember what your looking for,
>protection not savings! I preffer IPtables, despite the free price tag,
>simply because it is simple to add/remove/alter rules as needed, is
well
>maintained, and has plenty of community support. I do not encourage the
use
>of the front-ends that restrict the granularity or creation of custom
rules,
>hinder a learning of the process of IPtables for new users, or that
create
>there own non-standard config files. If a front-end exists that simply
>creates/inserts an iptables command line entry, that would be a good
tool.
>One of the best things about IPtables is you can create and run your
own
>script with lots of comments and custom rules, include keywords for
grepping
>log entries, and react to emergencies very quickly.
>
>Given that the cost is ok and that you have ample experience on staff,
then
>the single most important aspect would probably be flexability. Meaning
the
>ability to create custom rules in very little time, with  minimal
impact on
>the network.  Actually although that is a single factor, it is
determined by
>both the firewall and the admins experience.
>
>I worked one place and they had to reboot the firewall box in order to
>impliment new rules. That may have been either the fw, the os or the
admin
>that caused this requirement, but I think either way it was
unaceptable.
>
>You may also be looking for more than a fw, and may be concerned with
>email/spam filtering, vpn connections, etc.
>
> >
> > Thanks in advance for your help.
> > --
> > ************************************************************
> > Dana Holland    dana.holland@xxxxxxxxxxxxxxxxxx 903-875-7355
> > Navarro College    Corsicana, TX
> > http://www.navarrocollege.edu/staff_pages/dana/dana.html
> > ************************************************************
> > All opinions stated are my own, and probably don't even
> > vaguely resemble those of Navarro College.  :)
>
>
>Hope that helps.
>--
>Pete Nesbitt, rhce
>
>
>
>------------------------------
>
>Message: 7
>Date: Fri, 26 Nov 2004 08:16:55 +0100
>From: Padiyath Sreekumaran <Kumar.Padiyath@xxxxxx>
>Subject: RE: Perl script Problem with Linux
>To: "'golharam@xxxxxxxxx'" <golharam@xxxxxxxxx>,        "'General Red
Hat
>         Linux discussion list'" <redhat-list@xxxxxxxxxx>
>Message-ID: <ABC4EFAF3217D311A39200508B08F7FC04A95067@xxxxxxxxxxxx>
>Content-Type: text/plain
>
>
>   Hello,
>    Iam not an expert in Perl programming. Iam wondering why
>    Iam getting syntax error only with Linux OS. On SUN and Tru64
>    it works without any changes. Is it NOT possible that this error
>    comes from Perl setup or missing Perl routines on Linux? I made
>    a debug of the Perl script and found that the program dies in a
>    Perl script subroutine. But I donot know why.Any help is
appreciated.
>
>    Thanks in advance.
>    Regards,
>    Kumar
>
>-----Original Message-----
>From: Ryan Golhar [mailto:golharam@xxxxxxxxx]
>Sent: Donnerstag, 25. November 2004 16:50
>To: 'General Red Hat Linux discussion list'
>Subject: RE: Perl script Problem with Linux
>
> > Error in ./dnewsreport.103.conf line 9: must be 'section' instead of
> > '#'
>
>It looks like the perl script is dying with an error in the
>configuration file. Double-check the configuration file to make sure
its
>format is correct...
>
>Ryan
>
>-----Original Message-----
>From: redhat-list-bounces@xxxxxxxxxx
>[mailto:redhat-list-bounces@xxxxxxxxxx] On Behalf Of Ed Greshko
>Sent: Thursday, November 25, 2004 1:59 AM
>To: General Red Hat Linux discussion list
>Subject: Re: Perl script Problem with Linux
>
>
>Padiyath Sreekumaran wrote:
>
> >    I have a perl script which reads a configuration file. This
> >    Script works on SUN as well as Tru64 to certain extend. Since I
>donot
> >    have all the input files on SUN and Tru64 the script stops. The
> >    Problem on Linux is that it dies immediately in line 9 of the
> >    Configuration file. Iam using Perl version 5.8 and Redhat 9.0.
The
> >    problem is in the routine read_conf of the perl script. Iam not
an
> >    expert on Perl. Can any one help me? Am I missing any Perl
modules
> > on
> >
> >    Linux? Thanks for your help.
> >
> >
> >
> >    Iam enclosing both files: script and config file
>
>Seems as if the listserver strips out attachments....  Which is not a
>bad thing, IMHO.
>
> >    # perl -v
> > This is perl, v5.8.0 built for i386-linux-thread-multi
> >
> > (with 1 registered patch, see perl -V for more detail)
> >
> >    # uname -a
> >
> > Linux pc4289 2.4.20-28.9 #1 Thu Dec 18 13:45:22 EST 2003 i686 i686
> > i386 GNU/Linux
> >
> >    I know that I should have send this problem to Perl FAQ. Since I
>get
> >    error with Linux I thought that I shall ask here. Sorry for that.
> >
> >     Error I get on Linux:
> >
> >   # ./dnewsreport103.pl -f ./dnewsreport.103.conf
> >
> > Error in ./dnewsreport.103.conf line 9: must be 'section' instead of
> > '#'
>
>One common problem that presents itself in many ways is the setting of
>the LANG environment variable.  In later versions of RH it often
>defaults to:
>
>LANG=en_US.UTF-8
>
>try changing that to
>
>LANG=en_US
>
>or whatever you are using minus the .UTF-8
>
>This is just a stab in the dark.  YMMV.
>
>Ed
>
>
>
>--
>"I think the problem, to be quite honest with you, is that you've never
>actually known what the question is."
>
>--The computer "Deep Thought" in "Hitchhiker's Guide to The Galaxy"
>
>--
>redhat-list mailing list
>unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
>https://www.redhat.com/mailman/listinfo/redhat-list
>
>
>
>
>------------------------------
>
>Message: 8
>Date: Fri, 26 Nov 2004 07:14:30 -0500
>From: Jason Dixon <jason@xxxxxxxxxxxxxx>
>Subject: Re: Perl script Problem with Linux
>To: General Red Hat Linux discussion list <redhat-list@xxxxxxxxxx>
>Message-ID: <B98A6894-3FA4-11D9-A204-000D93C63BA8@xxxxxxxxxxxxxx>
>Content-Type: text/plain; charset=US-ASCII; format=flowed
>
>On Nov 26, 2004, at 2:16 AM, Padiyath Sreekumaran wrote:
>
> >   Hello,
> >    Iam not an expert in Perl programming. Iam wondering why
> >    Iam getting syntax error only with Linux OS. On SUN and Tru64
> >    it works without any changes. Is it NOT possible that this error
> >    comes from Perl setup or missing Perl routines on Linux? I made
> >    a debug of the Perl script and found that the program dies in a
> >    Perl script subroutine. But I donot know why.Any help is
> > appreciated.
>
>I *am* an expert in Perl programming, but that won't help you any
>without my ability to actually review the code you're referring to.
>Mailing lists like this one filter out attachments, so you'll need to
>provide a link to the code in question.  Without that, you're spinning
>your wheels and wasting our time.
>
>--
>Jason Dixon
>DixonGroup Consulting
>http://www.dixongroup.net
>
>
>
>
>------------------------------
>
>Message: 9
>Date: Fri, 26 Nov 2004 08:18:55 -0600
>From: "McDougall, Marshall (FSH)" <MarMcDouga@xxxxxxxxx>
>Subject: Power down of SMP servers
>To: General Red Hat Linux discussion list <redhat-list@xxxxxxxxxx>
>Message-ID:
>
<EFCBF8B206ABD211AC3D00A0C9DEBF7E02C40202@xxxxxxxxxxxxxxxxxxxx>
>Content-Type: text/plain
>
>I have several Intel SMP servers that I can't get to power off
>automatically.  I have googled high and low to find a process where I
can
>have them power off when I issue power_off or shutdown -h or any one of
the
>other available commands to make them do that.  Any single CPU machines
I
>have do it without question or any special configuration.
>
>These server are running RH 7.2, ES2.1 and ES3 with the various current
>kernels.  Does anybody have an SMP server running Linux that will power
down
>when you tell it to?  If so, how did you accomplish that task. All
replies
>appreciated.
>
>Regards, Marshall
>
>
>
>------------------------------
>
>Message: 10
>Date: Fri, 26 Nov 2004 15:02:30 -0000
>From: Amanda Galligan <Amanda.Galligan@xxxxxxxx>
>Subject: kernel panic HP DL 380 G3
>To: "'redhat-list@xxxxxxxxxx'" <redhat-list@xxxxxxxxxx>
>Message-ID:
>
<6FD0C1A3379D2047B391E218D0AD9B611726C1@xxxxxxxxxxxxxxxxxxxxxxxx>
>Content-Type: text/plain;       charset="iso-8859-1"
>
>We've received this error on HP DL 380 running Redhat 2.1 AS with
kernel
>2.4.9-e.38smp
>
>this error has already occured on another HP identical hardware and OS
>config. Is there issues with HP and this version of Kernel ?
>
>Nov 26 13:49:14 DHB0125A-IEDRL kernel: ------------[ cut here
]------------
>Nov 26 13:49:15 DHB0125A-IEDRL modprobe: modprobe: Can't locate module
>block-major-109
>Nov 26 13:49:15 DHB0125A-IEDRL eac: Warning: loading
>/lib/modules/2.4.9-e.38smp/kernel/drivers/net/eac/iprpf.o will taint
the
>kernel: non-GPL license - Commercial, see LICENSE file for details
>Nov 26 13:49:15 DHB0125A-IEDRL kernel: kernel BUG at slab.c:1155!
>Nov 26 13:49:15 DHB0125A-IEDRL modprobe: modprobe: Can't locate module
>block-major-110
>Nov 26 13:49:15 DHB0125A-IEDRL kernel: invalid operand: 0000
>Nov 26 13:49:15 DHB0125A-IEDRL modprobe: modprobe: Can't locate module
>block-major-111
>Nov 26 13:49:15 DHB0125A-IEDRL kernel: Kernel 2.4.9-e.38smp
>Nov 26 13:49:15 DHB0125A-IEDRL modprobe: modprobe: Can't locate module
>block-major-72
>Nov 26 13:49:15 DHB0125A-IEDRL kernel: CPU:    0
>Nov 26 13:49:15 DHB0125A-IEDRL modprobe: modprobe: Can't locate module
>block-major-73
>Nov 26 13:49:16 DHB0125A-IEDRL kernel: EIP:
0010:[kmem_cache_grow+38/640]
>Tainted: P
>Nov 26 13:49:16 DHB0125A-IEDRL modprobe: modprobe: Can't locate module
>block-major-74
>Nov 26 13:49:16 DHB0125A-IEDRL kernel: EIP:    0010:[<c0137d36>]
Tainted:
>P
>Nov 26 13:49:16 DHB0125A-IEDRL modprobe: modprobe: Can't locate module
>block-major-75
>Nov 26 13:49:16 DHB0125A-IEDRL kernel: EFLAGS: 00010282
>Nov 26 13:49:16 DHB0125A-IEDRL modprobe: modprobe: Can't locate module
>block-major-76
>Nov 26 13:49:16 DHB0125A-IEDRL kernel: EIP is at kmem_cache_grow
[kernel]
>0x26
>Nov 26 13:49:16 DHB0125A-IEDRL modprobe: modprobe: Can't locate module
>block-major-77
>Nov 26 13:49:16 DHB0125A-IEDRL kernel: eax: 0000001e   ebx: f7fc9080
ecx:
>c02f6e84   edx: 00004dec
>Nov 26 13:49:16 DHB0125A-IEDRL modprobe: modprobe: Can't locate module
>block-major-78
>Nov 26 13:49:16 DHB0125A-IEDRL kernel: esi: f7fc9080   edi: 000001f0
ebp:
>dd170000   esp: dd171e98
>Nov 26 13:49:16 DHB0125A-IEDRL modprobe: modprobe: Can't locate module
>block-major-79
>Nov 26 13:49:16 DHB0125A-IEDRL kernel: ds: 0018   es: 0018   ss: 0018
>Nov 26 13:49:16 DHB0125A-IEDRL kernel: Process modprobe (pid: 2144,
>stackpage=dd171000)
>Nov 26 13:49:17 DHB0125A-IEDRL kernel: Stack: c0266c2b 00000483
c012d690
>ddaeff20 dd8082e0 401a2000 dd171ec0 dd551400
>Nov 26 13:49:17 DHB0125A-IEDRL kernel:        00104025 c030a848
f7fc9080
>f7fc9080 00000246 dd170000 c01383e8 f7fc9080
>Nov 26 13:49:17 DHB0125A-IEDRL kernel:        000001f0 f8aca05d
f8aeca60
>c02f94c0 00000000 00000000 00000100 ddacb000
>Nov 26 13:49:17 DHB0125A-IEDRL kernel: Call Trace:
>[call_spurious_interrupt+132298/157983] .rodata.str1.1 [kernel] 0x2ba6
(0xd
>d171e98)
>Nov 26 13:49:17 DHB0125A-IEDRL kernel: Call Trace: [<c0266c2b>]
>.rodata.str1.1 [kernel] 0x2ba6 (0xdd171e98)
>Nov 26 13:49:17 DHB0125A-IEDRL kernel: [handle_mm_fault+240/336]
>handle_mm_fault [kernel] 0xf0 (0xdd171ea0)
>Nov 26 13:49:17 DHB0125A-IEDRL kernel: [<c012d690>] handle_mm_fault
[kernel]
>0xf0 (0xdd171ea0)
>Nov 26 13:49:17 DHB0125A-IEDRL kernel: [kmalloc+312/352] kmalloc
[kernel]
>0x138 (0xdd171ed0)
>Nov 26 13:49:17 DHB0125A-IEDRL kernel: [<c01383e8>] kmalloc [kernel]
0x138
>(0xdd171ed0)
>Nov 26 13:49:17 DHB0125A-IEDRL kernel: [<f8aca05d>] routem_init [iprpf]
0xbd
>(0xdd171edc)
>Nov 26 13:49:17 DHB0125A-IEDRL kernel: [<f8aeca60>] routem_sockopt
[iprpf]
>0x0 (0xdd171ee0)
>Nov 26 13:49:17 DHB0125A-IEDRL kernel: [<f8ac8f41>] ecpf_init [iprpf]
0xa5
>(0xdd171efc)
>Nov 26 13:49:17 DHB0125A-IEDRL kernel: [<f8ac8ec5>] ecpf_init [iprpf]
0x29
>(0xdd171f0c)
>Nov 26 13:49:17 DHB0125A-IEDRL kernel: [__free_pages+27/32]
__free_pages
>[kernel] 0x1b (0xdd171f28)
>Nov 26 13:49:17 DHB0125A-IEDRL kernel: [<c013de6b>] __free_pages
[kernel]
>0x1b (0xdd171f28)
>Nov 26 13:49:17 DHB0125A-IEDRL kernel: [sys_init_module+1365/1616]
>sys_init_module [kernel] 0x555 (0xdd171f2c)
>Nov 26 13:49:17 DHB0125A-IEDRL kernel: [<c011d995>] sys_init_module
[kernel]
>0x555 (0xdd171f2c)
>Nov 26 13:49:17 DHB0125A-IEDRL kernel: [<f8ac8060>]
ecpf_dev_get_by_name
>[iprpf] 0x0 (0xdd171f58)
>Nov 26 13:49:17 DHB0125A-IEDRL kernel: [system_call+51/56] system_call
>[kernel] 0x33 (0xdd171fc0)
>Nov 26 13:49:17 DHB0125A-IEDRL kernel: [<c01073e3>] system_call
[kernel]
>0x33 (0xdd171fc0)
>Nov 26 13:49:17 DHB0125A-IEDRL kernel:
>Nov 26 13:49:17 DHB0125A-IEDRL kernel:
>Nov 26 13:49:17 DHB0125A-IEDRL kernel: Code: 0f 0b 58 5a f7 c7 00 10 00
00
>0f 85 3e 02 00 00 b8 00 e0 ff
>Nov 26 13:49:17 DHB0125A-IEDRL kernel:  <0>Kernel panic: not continuing
>
>
>
>
>
>
>
>Esat Telecommunications Limited
>is a wholly owned subsidiary of BT Group plc
>Registered in Ireland, Registration No. 141524
>Grand Canal Plaza, Upper Grand Canal Street, Dublin, Ireland
>
>This electronic message contains information (and may contain files)
from
>Esat Telecommunications Limited which may be privileged or
confidential. The
>information is intended to be for the sole use of the individual(s) or
>entity named above. If you are not the intended recipient be aware that
any
>disclosure, copying, distribution or use of the contents of this
information
>and or files is prohibited. If you have received this electronic
message in
>error, please notify us by telephone or email (to the numbers or
address
>above) immediately. http://www.esatbt.com
>
>
>------------------------------
>
>__
>redhat-list mailing list
>Unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
>https://www.redhat.com/mailman/listinfo/redhat-list
>
>End of redhat-list Digest, Vol 9, Issue 28
>******************************************




------------------------------

Message: 2
Date: Sat, 27 Nov 2004 11:33:47 -0600
From: Aimin Yan <aiminy@xxxxxxxxxxx>
Subject: how to set up wireless network connection in Fedro 2
To: redhat-list@xxxxxxxxxx
Message-ID:
	<6.0.1.1.2.20041127112939.033ad680@xxxxxxxxxxxxxxxxxxxxxxx>
Content-Type: text/plain; charset="us-ascii"; format=flowed

hello,
I have dual oprating system, WinXP and Fedora Core 2.
How can I read Window File under Fedora Core 2?
Also Can I read files of Fedora Core 2 under Windows?
thanks,

Aimin Yan



------------------------------

Message: 3
Date: Sat, 27 Nov 2004 18:50:36 +0100 (CET)
From: Willy Wittesaele <w2@xxxxxxxxx>
Subject: Re: how to set up wireless network connection in Fedro 2
To: General Red Hat Linux discussion list <redhat-list@xxxxxxxxxx>
Message-ID:
	<Pine.LNX.4.44.0411271849340.28859-100000@xxxxxxxxxxxxxxxxxxxxx>
Content-Type: TEXT/PLAIN; charset=US-ASCII

your subject title does not match the content ot the message !!!

willy

On Sat, 27 
Nov 2004, Aimin Yan wrote:

> hello,
> I have dual oprating system, WinXP and Fedora Core 2.
> How can I read Window File under Fedora Core 2?
> Also Can I read files of Fedora Core 2 under Windows?
> thanks,
> 
> Aimin Yan
> 
> 



------------------------------

Message: 4
Date: Sat, 27 Nov 2004 23:05:52 +0100
From: Padiyath Sreekumaran <Kumar.Padiyath@xxxxxx>
Subject: Re:Perl script problem
To: redhat-list@xxxxxxxxxx
Message-ID: <ABC4EFAF3217D311A39200508B08F7FC04A95073@xxxxxxxxxxxx>
Content-Type: text/plain;	charset="iso-8859-1"



  Hello, 
  Thanks for all the help. As suggested by Perl gurus I did the
   following and it works now.

   export LANG=en_us

    Thanks very much and with regards,
       Kumar



------------------------------

Message: 5
Date: Sun, 28 Nov 2004 06:33:09 +0800
From: Ed Greshko <Ed.Greshko@xxxxxxxxxxx>
Subject: Re: Perl script problem
To: General Red Hat Linux discussion list <redhat-list@xxxxxxxxxx>
Message-ID: <41A900A5.8050307@xxxxxxxxxxx>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed



Padiyath Sreekumaran wrote:

>   Thanks for all the help. As suggested by Perl gurus I did the
>    following and it works now.
> 
>    export LANG=en_us
> 
>     Thanks very much and with regards,

You are welcome....

-- 
"I think the problem, to be quite honest with you, is that you've never
actually known what the question is."

--The computer "Deep Thought" in "Hitchhiker's Guide to The Galaxy"



------------------------------

Message: 6
Date: Sat, 27 Nov 2004 20:34:45 -0500
From: mark <whitroth@xxxxxxxxxx>
Subject: RH 9 install crashes
To: redhat-list@xxxxxxxxxx
Message-ID: <41A92B35.7060609@xxxxxxxxxx>
Content-Type: text/plain; charset=us-ascii; format=flowed

    well, I *finally*got the ok to upgrade my SO's system, and I wound
up
burning three CDs, and booting, and the install starts...and right after
I agree that it's upgrading a 7.3 system, and to go ahead, the install
crashes with python errors.

    I even let it check the validity of the media.

    Ever heard of something like this?

	mark
-- 
We are neither anti-semitic, nor anti-Israel. We are, however,
vehemently against the ruling Likud party, who is, in Israel,
like the GOP in the US, the representatives of the rich and
extreme right wing.



------------------------------

Message: 7
Date: Sat, 27 Nov 2004 19:53:44 -0600
From: Ed Wilts <ewilts@xxxxxxxxxx>
Subject: Re: RH 9 install crashes
To: General Red Hat Linux discussion list <redhat-list@xxxxxxxxxx>
Message-ID: <20041128015344.GA21821@xxxxxxxxxxxxxx>
Content-Type: text/plain; charset=us-ascii

On Sat, Nov 27, 2004 at 08:34:45PM -0500, mark wrote:
>    well, I *finally*got the ok to upgrade my SO's system, and I wound
up
> burning three CDs, and booting, and the install starts...and right
after
> I agree that it's upgrading a 7.3 system, and to go ahead, the install
> crashes with python errors.

7.3 to 9 is a big jump and 9 isn't supported any more anyway (and hasn't
been for 6 months).  I'd suggest that you be better off backing up the
important data and doing a fresh install of Fedora Core 3.

Upgrades are always risky and iffy on Linux.  They work sometimes for
some people, but in general, avoid them if you can.

-- 
Ed Wilts, RHCE
Mounds View, MN, USA
mailto:ewilts@xxxxxxxxxx
Member #1, Red Hat Community Ambassador Program



------------------------------

Message: 8
Date: Sun, 28 Nov 2004 15:41:17 +0200
From: "Rushan Sobar" <Rushan@xxxxxxxxxx>
Subject: auto restart on cpu usage
To: <redhat-list@xxxxxxxxxx>
Message-ID: <088401c4d54f$f151d060$c4c49ec3@rushan>
Content-Type: text/plain;	charset="iso-8859-1"

hi,

how to set my Redhat 9 server to auto restart process when the CPU usage
for that process hit a target limit?
eg. if httpd reach 80% of CPU usage to restart the apache.


RegardS

-- 
This message has been scanned for viruses and
dangerous content by MEC E-Mail Scanner, and is
believed to be clean.
--
www.mec.com.jo



------------------------------

Message: 9
Date: Sun, 28 Nov 2004 18:45:27 +0500
From: "Asim Ansari" <aansari@xxxxxxxxxx>
Subject: Linux Memory Management
To: <redhat-list@xxxxxxxxxx>
Message-ID: <VPOP31.3.0b.20041128184544.677.db8.1.9cd5689f@icplnt>
Content-Type: text/plain;	charset="us-ascii"

Hello All,
 
I need explaination of the following Linux terms (in red), if someone
can
tell me the URL having details all about it
 
Thanks in Advance.
 
Asim
 
                       total:                used:           free:
shared:     buffers:          cached:
Mem:              1050611712      46870528     1003741184     0
3641344         25792512

Swap:             4194848768      0                  4194848768
MemTotal:       1025988 kB
MemFree:        980216 kB
MemShared:    0 kB
Buffers:           3556 kB
Cached:          25188 kB
SwapCached:  0 kB
Active:            30148 kB
ActiveAnon:     5552 kB
ActiveCache:   24596 kB
Inact_dirty:      2856 kB
Inact_laundry:  1056 kB
Inact_clean:     0 kB
Inact_target:    6812 kB
HighTotal:       129488 kB
HighFree:        94560 kB
LowTotal:        896500 kB
LowFree:        885656 kB
SwapTotal:     4096532 kB
SwapFree:     4096532 kB
HugePages_Total:     0
HugePages_Free:      0
Hugepagesize:     4096 kB

 


------------------------------

Message: 10
Date: Sun, 28 Nov 2004 15:47:58 +0200
From: "Rushan Sobar" <Rushan@xxxxxxxxxx>
Subject: FOS
To: <redhat-list@xxxxxxxxxx>
Message-ID: <088b01c4d550$e0a92d20$c4c49ec3@rushan>
Content-Type: text/plain;	charset="iso-8859-1"

Hi,

if i want to set 2 machine as primary server and the other machine as
redundant in case of primary fail is there any software or tool to do
that?
any advice?

Regards
-- 
This message has been scanned for viruses and
dangerous content by MEC E-Mail Scanner, and is
believed to be clean.
--
www.mec.com.jo



------------------------------

Message: 11
Date: Sun, 28 Nov 2004 09:31:46 -0600
From: Ed Wilts <ewilts@xxxxxxxxxx>
Subject: Re: FOS
To: General Red Hat Linux discussion list <redhat-list@xxxxxxxxxx>
Message-ID: <20041128153146.GA17451@xxxxxxxxxxxxxx>
Content-Type: text/plain; charset=us-ascii

On Sun, Nov 28, 2004 at 03:47:58PM +0200, Rushan Sobar wrote:
> if i want to set 2 machine as primary server and the other machine as
> redundant in case of primary fail is there any software or tool to do
> that?  any advice?

http://www.linux-ha.org/

-- 
Ed Wilts, RHCE
Mounds View, MN, USA
mailto:ewilts@xxxxxxxxxx
Member #1, Red Hat Community Ambassador Program



------------------------------

Message: 12
Date: Sun, 28 Nov 2004 09:34:13 -0600
From: "Mike Vanecek" <rh_list@xxxxxxxxxxxxx>
Subject: Re: Format Output of bash into columns
To: General Red Hat Linux discussion list <redhat-list@xxxxxxxxxx>
Message-ID: <20041128153044.M49402@xxxxxxxxxxxxx>
Content-Type: text/plain;	charset=iso-8859-1

On Sat, 27 Nov 2004 17:41:54 +0300, Alexey Fadyushin wrote
> 
> To prevent truncation when using 'pr' you could use its option '-J' 
> (columns will not be truncated, but there will be problems with 
> alingment of columns) or explicitly specify the width of resulting 
> output using '-W<number of chars>' (by default 'pr' output is 72 
> characters wide).
> 
> For example:
> rpm -qa | sort | pr --columns 3 -aT -J
> or
> rpm -qa | sort | pr --columns 3 -aT -W132

That helps, even ... 

rpm -qa | sort | pr --columns 3 -aT -W100 

or 

pr --columns 3 -aT -W100 rpm.txt

Very useful command.

Thank you.



------------------------------

Message: 13
Date: Sun, 28 Nov 2004 09:41:24 -0600
From: "Mike Vanecek" <rh_list@xxxxxxxxxxxxx>
Subject: Re: Format Output of bash into columns
To: General Red Hat Linux discussion list <redhat-list@xxxxxxxxxx>
Message-ID: <20041128153444.M39032@xxxxxxxxxxxxx>
Content-Type: text/plain;	charset=iso-8859-1

On Sat, 27 Nov 2004 16:00:35 +0100, Michael Schwendt wrote
> On Fri, 26 Nov 2004 17:37:42 -0600, Mike Vanecek wrote:

> > I would like to run the output of a bash command that produces 1
field per
> > line output through sort and then output in 3 columns. I have looked
at
> > printf, fmt, column, and so on.
> > 
> > For example,
> > 
> > rpm -qa | sort 2>&1 |  column -c 2 
> > 
> > rpm -qa | sort |  column -c 2
 
> Option -c sets the screen width, i.e. the number of horizontal
> characters, where one character = one column. So, you don't want
> "-c 2", but something way bigger than 2, so two RPM package names
> always fit onto the screen horizontally.

Opps, thank you ...

rpm -qa | sort |  column

outputs 2 columns very nicely. Had to go to 

rpm -qa | sort |  column -c 100

to get the same thing.

This seems to be a bit more flexible ...

rpm -qa | sort | pr --columns 3 -aT -W100

Thanks.



------------------------------

Message: 14
Date: Sun, 28 Nov 2004 09:52:50 -0600
From: "Mike Vanecek" <rh_list@xxxxxxxxxxxxx>
Subject: Re: Format Output of bash into columns
To: General Red Hat Linux discussion list <redhat-list@xxxxxxxxxx>
Message-ID: <20041128154934.M26369@xxxxxxxxxxxxx>
Content-Type: text/plain;	charset=iso-8859-1

On Sat, 27 Nov 2004 10:15:06 -0500, Anthony E. Greene wrote

> >On Fri, 26 Nov 2004 19:27:09 -0500, Anthony E. Greene wrote

> >> You could get fancy using perl's formatting features, but this
quick$
> >> dirty should work for lines that are all of similar length, or for
input
> >> in an application that easily parses tab-delimited data.
> >
> 
> Uh... I forgot to increment the column number.
> 
>      print "$line     ";
> 
> prints the variable and a tab, not the variable and 5 spaces. A
straight
> copy/paste frome the message may have resulted in spaces rather than 
> a tab.

Gotcha. Of course, this does not line up the columns, but (as you
originally 
said), could be input into something that processes tab delimited
columns.

#!/usr/bin/perl
#
# Format STDIN into three tab-delimited columns
#
$colnum = 1;
while ($line = <STDIN>) {
 chomp $line;
 if ($colnum < 3) {
   print "$line          ";  # The whitespace is a tab character.
   $colnum = $colnum + 1;
 } else {
   print "$line\n"; $colnum = 1;
 }
}

Thanks again.



------------------------------

__
redhat-list mailing list
Unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list

End of redhat-list Digest, Vol 9, Issue 30
******************************************

**********************************************************************
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
the system manager.

This footnote also confirms that this email message has been swept by
MIMEsweeper for the presence of computer viruses.

www.clearswift.com
**********************************************************************



-- 
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list

[Index of Archives]     [CentOS]     [Kernel Development]     [PAM]     [Fedora Users]     [Red Hat Development]     [Big List of Linux Books]     [Linux Admin]     [Gimp]     [Asterisk PBX]     [Yosemite News]     [Red Hat Crash Utility]


  Powered by Linux