Hello linux world.
I've a serious hardware problem. More than one year I've used D865GBFL (Intel motherboard) with 3WARE Escalade 7006-2 ATA RAID Controller with two Seagate Barracuda 120G ATA disks and SuSE 9.0. And I've tested it with new SuSE 9.2 and RH9(all worked fine). (And with original kernel with latest driver)
Now I've got D-Link DFE580TX Four-port ethernet card. After installation of this adapter into my computer the server started to hang from several seconds/minutes of work. It happens and with another PCI card - Cronyx PCI (8port RS232 controller (http://www.cronyx.ru)). I have not had time to establish the driver of these devices at all!
Who knows, why my controllers do not work in pair with 3WARE Escalade 7006-2 ?
P.S. I've tested it situation with another intel mother board D865GLCL (i865G chipset too). The result is the same. But All my devices are work fine on a 440BX chipset. (Test on a old ASUS motherboard without needed productivity)
P.S.2 I've succefully installed latest firmware and bios of 3ware card and motherboard.
Is the intel motherboard with 865G chipset is not good?
If so, who can to recommend me other good motherboard for using with 3ware Escalade 7006-2 and 1+ PCI cards?
Thank you for any future help. Nick.
-- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list
