Thanks Ed. I'll take a look.
Cheers,
Jason
Ed Greshko wrote:
Jason Gray wrote:
I found out how to do this so you don't need to post a reply...
echo "scsi add-single-device 0 1 2 3" > /proc/scsi/scsi
with 0 1 2 3 being:
Host / Channel / Target ID / LUN
OK....but since I did the research I don't want it to "go to waste"....
Try using scsiadd from....
http://freshmeat.net/projects/scsiadd/homepage/
Regards, Ed
Cheers,
Jason
Jason Gray wrote:
Hello...
I've recently installed a iSCSI card from adaptec (asa7211c) and everything works great except when I add new volumes to the system. Each volume that is exposed on our iSCSI portal is presented to the iSCSI initiator (Server) as a SCSI device (i.e. /dev/sda). However, the kernel needs to be rebooted everytime I add a new SCSI device. I'm trying to get the system to recongnize the new device without having to reboot. Is there a way of doing this? I thought that the hotplug script would work but it seems to only work with hosts (i.e. HBA). Is this a limitation of Linux? It would be similar to adding a new SCSI drive to a system using hotpluggable support.
Sys Configs:
Linux BDrender 2.4.26 #1 SMP Tue Oct 26 14:06:30 PDT 2004 i686 i686 i386 GNU/Linux
Redhat 9.0
modules:
scsimon 11364 0 autofs 13844 0 (autoclean) (unused) e100 59460 1 e1000 76000 1 asa72xx 46884 9 keybdev 3136 0 (unused) mousedev 5688 0 (unused) input 6144 0 [keybdev mousedev] ext3 74468 11 jbd 56688 11 [ext3] raid1 16012 4 lvm-mod 62784 27 aic7xxx 203216 0 sd_mod 13356 18 scsi_mod 112952 4 [scsimon asa72xx aic7xxx sd_mod]
-- Jason Gray Bardel Entertainment Inc. 604-669-5589 jgray@xxxxxxxxx
-- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list
