I fixed it. Since when the power goes off the router resets and my server PC powers back up, I just changed the IP forwarding in the router to 192.168.1.2, since that's the first IP address to be assigned through the router after the router is rebooted. I'm sorry guys. I should have thought of that a long time ago.... -Michael Sullivan- > Message: 13 > Date: Wed, 2 Jun 2004 20:19:29 -0400 > From: "Larry Brown" <larry.brown@xxxxxxxxxxxxxxxxxxxxx> > Subject: RE: redhat-list Digest, Vol 4, Issue 1 > To: "General Red Hat Linux discussion list" <redhat-list@xxxxxxxxxx> > Message-ID: > <CBECIONKKLMDDCIKHALJKEDBLHAA.larry.brown@xxxxxxxxxxxxxxxxxxxxx> > Content-Type: text/plain; charset="iso-8859-1" > > You say "outside the router"... Is the router a linux box that you have in > question? Or is the router something like a netgear/linksys etc. cable > modem router? > > -----Original Message----- > From: redhat-list-bounces@xxxxxxxxxx > [mailto:redhat-list-bounces@xxxxxxxxxx]On Behalf Of Michael Sullivan > Sent: Tuesday, June 01, 2004 9:57 AM > To: redhat-list@xxxxxxxxxx > Subject: Re: redhat-list Digest, Vol 4, Issue 1 > > > Ok I think I understand, but I don't know which IP address is which. > Outside the router I have a static IP address set up with the ISP. It's > inside the router that I have problems. Outside the router our address > here is 68.15.193.18, but inside the address of the server PC that needs > the static address is 192.168.1.4 I need to make sure that all mail and > http requests are sent there. There wasn't a man file for ifcfg-eth0. > How would I set this up? > > > > > Message: 7 > > Date: Mon, 31 May 2004 13:31:27 -0400 > > From: "Larry Brown" <larry.brown@xxxxxxxxxxxxxxxxxxxxx> > > Subject: RE: Setting RH9 for static IP > > To: "General Red Hat Linux discussion list" <redhat-list@xxxxxxxxxx> > > Message-ID: > > <CBECIONKKLMDDCIKHALJAEMDLGAA.larry.brown@xxxxxxxxxxxxxxxxxxxxx> > > Content-Type: text/plain; charset="iso-8859-1" > > > > ex for /etc/sysconfig/network-scripts/ifcfg-eth0 > > > > DEVICE=eth0 > > BOOTPROTO=static > > BROADCAST=192.168.1.255 > > IPADDR=192.168.1.6 > > NETMASK=255.255.255.0 > > NETWORK=192.168.1.0 > > ONBOOT=yes > > > > just replace the addresses with the static address assigned you from your > > ISP. > > > > -----Original Message----- > > From: redhat-list-bounces@xxxxxxxxxx > > [mailto:redhat-list-bounces@xxxxxxxxxx]On Behalf Of Stephen Kuhn > > Sent: Monday, May 31, 2004 12:17 PM > > To: General Red Hat Linux discussion list > > Subject: Re: Setting RH9 for static IP > > > > > > On Tue, 2004-06-01 at 02:13, Michael Sullivan wrote: > > > I have a PC with RH9 installed on it, but because the hard drive is so > > > small, I only did a server install on it. My network receives DHCP > > > addresses from the router. It's thunderstorm season here in Oklahoma, > > > and when the power goes off the router gets reset, along with all the > > > DHCP addresses. I was wondering if I could set up the server PC to > > > always have the same address and not use DHCP, because if the power goes > > > off in the middle of the night while we're asleep, we don't get our mail > > > and people can't get to the website until I fix it in the morning. If > > > XFree86 was installed, I would just use neat, but there wasn't room for > > > XFree86. What file do I need to edit to set the server PC to always use > > > the same local IP? > > > > > > -Michael Sullivan- > > > > /etc/resolv.conf > > /etc/sysconfig/network > > /etc/sysconfig/network-scripts/eth0-conf > > > > stephen kuhn - owner > > ============================== > > illawarra computer services > > a kuhn media australia company > > http://kma.0catch.com > > ------------------------------------------------------------------ > > * This message was composed on a 100% Microsoft free computer * > > We expressly refuse to utilise Microsoft DRM encoded documents > > ------------------------------------------------------------------ > > Your sister swims out to meet troop ships. > > > > > > -- > > redhat-list mailing list > > unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe > > https://www.redhat.com/mailman/listinfo/redhat-list > > > > -- > redhat-list mailing list > unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe > https://www.redhat.com/mailman/listinfo/redhat-list -- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list
